Product Description
Product Description
Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.How long is your delivery time and shipment?
30-45days
Type: | Pto Shaft |
---|---|
Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
Material: | 45cr Steel |
Power Source: | Pto Dirven Shaft |
Weight: | 8-15kg |
After-sales Service: | Online Support |
Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How do manufacturers ensure the compatibility of drive shafts with different equipment?
Manufacturers employ various strategies and processes to ensure the compatibility of drive shafts with different equipment. Compatibility refers to the ability of a drive shaft to effectively integrate and function within a specific piece of equipment or machinery. Manufacturers take into account several factors to ensure compatibility, including dimensional requirements, torque capacity, operating conditions, and specific application needs. Here’s a detailed explanation of how manufacturers ensure the compatibility of drive shafts:
1. Application Analysis:
Manufacturers begin by conducting a thorough analysis of the intended application and equipment requirements. This analysis involves understanding the specific torque and speed demands, operating conditions (such as temperature, vibration levels, and environmental factors), and any unique characteristics or constraints of the equipment. By gaining a comprehensive understanding of the application, manufacturers can tailor the design and specifications of the drive shaft to ensure compatibility.
2. Customization and Design:
Manufacturers often offer customization options to adapt drive shafts to different equipment. This customization involves tailoring the dimensions, materials, joint configurations, and other parameters to match the specific requirements of the equipment. By working closely with the equipment manufacturer or end-user, manufacturers can design drive shafts that align with the equipment’s mechanical interfaces, mounting points, available space, and other constraints. Customization ensures that the drive shaft fits seamlessly into the equipment, promoting compatibility and optimal performance.
3. Torque and Power Capacity:
Drive shaft manufacturers carefully determine the torque and power capacity of their products to ensure compatibility with different equipment. They consider factors such as the maximum torque requirements of the equipment, the expected operating conditions, and the safety margins necessary to withstand transient loads. By engineering drive shafts with appropriate torque ratings and power capacities, manufacturers ensure that the shaft can handle the demands of the equipment without experiencing premature failure or performance issues.
4. Material Selection:
Manufacturers choose materials for drive shafts based on the specific needs of different equipment. Factors such as torque capacity, operating temperature, corrosion resistance, and weight requirements influence material selection. Drive shafts may be made from various materials, including steel, aluminum alloys, or specialized composites, to provide the necessary strength, durability, and performance characteristics. The selected materials ensure compatibility with the equipment’s operating conditions, load requirements, and other environmental factors.
5. Joint Configurations:
Drive shafts incorporate joint configurations, such as universal joints (U-joints) or constant velocity (CV) joints, to accommodate different equipment needs. Manufacturers select and design the appropriate joint configuration based on factors such as operating angles, misalignment tolerances, and the desired level of smooth power transmission. The choice of joint configuration ensures that the drive shaft can effectively transmit power and accommodate the range of motion required by the equipment, promoting compatibility and reliable operation.
6. Quality Control and Testing:
Manufacturers implement stringent quality control processes and testing procedures to verify the compatibility of drive shafts with different equipment. These processes involve conducting dimensional inspections, material testing, torque and stress analysis, and performance testing under simulated operating conditions. By subjecting drive shafts to rigorous quality control measures, manufacturers can ensure that they meet the required specifications and performance criteria, guaranteeing compatibility with the intended equipment.
7. Compliance with Standards:
Manufacturers ensure that their drive shafts comply with relevant industry standards and regulations. Compliance with standards, such as ISO (International Organization for Standardization) or specific industry standards, provides assurance of quality, safety, and compatibility. Adhering to these standards helps manufacturers meet the expectations and requirements of equipment manufacturers and end-users, ensuring that the drive shafts are compatible and can be seamlessly integrated into different equipment.
8. Collaboration and Feedback:
Manufacturers often collaborate closely with equipment manufacturers, OEMs (Original Equipment Manufacturers), or end-users to gather feedback and incorporate their specific requirements into the drive shaft design and manufacturing processes. This collaborative approach ensures that the drive shafts are compatible with the intended equipment and meet the expectations of the end-users. By actively seeking input and feedback, manufacturers can continuously improve their products’ compatibility and performance.
In summary, manufacturers ensure the compatibility of drive shafts with different equipment through a combination of application analysis, customization, torque and power capacity considerations, material selection, joint configurations, quality control and testing, compliance with standards, and collaboration with equipment manufacturers and end-users. These efforts enable manufacturers to design and produce drive shafts that seamlessly integrate with various equipment, ensuring optimal performance, reliability, and compatibility in different applications.
How do drive shafts handle variations in load and vibration during operation?
Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:
1. Material Selection and Design:
Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.
2. Torque Capacity:
Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.
3. Dynamic Balancing:
During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.
4. Dampers and Vibration Control:
Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.
5. CV Joints:
Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.
6. Lubrication and Maintenance:
Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.
7. Structural Rigidity:
Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.
8. Control Systems and Feedback:
In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.
In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.
How do drive shafts contribute to transferring rotational power in various applications?
Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:
1. Vehicle Applications:
In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.
2. Machinery Applications:
In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.
3. Power Transmission:
Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.
4. Flexible Coupling:
One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.
5. Torque and Speed Transmission:
Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.
6. Length and Balance:
The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.
7. Safety and Maintenance:
Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.
In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.
editor by CX 2023-11-14
Best factory made in China – replacement parts – PTO shaft manufacturer & factory Malawi kubota tractor drive shaft removal Hot Sale Dq1204 120HP 4WD High Quality Cheap Agricultural Wheel Farming Tractor Made in China with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto factory in China with 5 different branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
extended tractor pto shaft Below pto shaft areas for sale the front axle half shaft advice front travel shaft universal joint substitute of fertilizer spreader pto shaft managerial pto shaft for john deere 567 baler feeling pto shaft edmonton of pto over managing coupler “Serving pto hydraulic piston pump agriculture, pto output scoring a achievement via good quality of items and honesty in enterprise”, our products have been reliable by clients and have obtained a more substantial share of market. The company masking 88,000 sq. meters, has sophisticated tools and strong specialized toughness, such as the numerical control equipment instruments and machining facilities, CAD/CAM system, industrial robotic etc. Malawi hot sale DQ1204 120HP Four wheel drive Higher good quality inexpensive Agricultural wheel Farming Tractor Manufactured in China
Tractor Primary Characteristics and Rewards:
one.Equipped well-known model motor showing superior ability,lower fuel usage,large economic efficiency.
two. Streamlined look layout, lovely and generous.
3.Transmission Scenario adopt meshed shift and add the gearbox interlock system tends to make the procedure a lot more easily,dependable and less complicated.
4. Double action clutch with disc spring, perform steadily and simple to work.
five. Totally hydraulic steering program significantly diminished driver’s work power.
6. Soaked disc brake unit, trustworthy brake performance.
seven. Independent injection of hydraulic oil, reputable to function.
eight. The lifter with drive and position adjustment, with trustworthy elevate.
9. Tractor PTO:
PTO in Double velocity : 540/760r/min Optional, For high operating efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all more than the world.
10. Huge Chassis and Heavy-obligation Rear axle for Durable Sturdy equipment.
11. Complete sequence mild, ROPS,Sunshade/Canopy, Supporter/Heater/Air-conditioned cabin are all available, for much more relaxed driving setting.
Tractor Primary specificaiton and Complex parameters:
DQ1204 120HP 4W D Tractor detai EPT present :
DQ1204 120HP Four wheel drive have Numerous Optional configurations and shades for decide on:
EPT Manufacutring Line:
Strictly Inspecting and Full Screening for making certain large top quality product:
Tractor Packing and Loading container for Providing merchandise :
You should contact us if you have any demand for our product :
Best cost will be quoted for you as before long as obtain your Prerequisite !
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Widely tractor pto shaft protector Used Durable Pto Shaft Yoke for Agricultural with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto factory in China with 5 diverse branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
howse brush hog parts Below pto shaft horsepower ranking the walterscheid pto catalogue advice pto shaft for woods mower of audi q5 drive shaft managerial vicon pto shaft perception honda crv entrance generate shaft alternative of pto shaft gets generate from “Serving correcting pto shaft agriculture, sq720 bush hog scoring a accomplishment via good quality of products and honesty in company”, our products have been trusted by consumers and have acquired a bigger share of market. EPG is specialized in design and style, producer and sales of agricultural equipment and farm implements, which has an independent import and export rights.
Widely Used Sturdy pto shaft yoke for agricultural
one. Tubes or Pipes
We’ve previously received Triangular profile tube and Lemon profile tube for all the series we provide.
And we have some star tube, splined tube and other profile tubes needed by our consumers (for a particular collection). (You should discover that our catalog doesnt have all the products we produce)
If you w EPT tubes other than triangular or lemon, make sure you supply drawings or images.
2.Finish yokes
We have received many sorts of rapid launch yokes and basic bore yoke. I will advise the common type for your reference.
You can also send out drawings or photos to us if you are not able to locate your item in our catalog.
three. Safety units or clutches
I will connect the detai EPT of basic safety units for your reference. We’ve presently have Free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).
4.For any other much more EPT needs with plastic guard, link technique, coloration of portray, bundle, and many others., please truly feel totally free to allow me know.
Characteristics:
1. We have been specialized in creating, producing drive shaft, steering coupler shaft, common joints, which have exported to the Usa, Europe, Australia and so on for years
two. Software to all sorts of standard mechanical situation
3. Our goods are of higher depth and rigidity.
4. Heat resist EPT & Acid resistant
5. OEM orders are welcomed
Our manufacturing unit is a leading manufacturer of PTO shaft yoke and universal joint.
We manufacture substantial quality PTO yokes for a variety of vehicles, EPT machinery and equipment. All products are created with rotating lighter.
We are at present exporting our products all through the entire world, particularly to North The us, South The usa, Europe, and Russia. If you are intrigued in any merchandise, please do not be reluctant to speak to us. We are seeking forward to turning out to be your suppliers in the in close proximity to long term.
Best manufacturer made in China – replacement parts – PTO shaft manufacturer & factory Hot series 4 vs series 6 pto shaft Sale Tractor Mounted 1.4m Agricultural Reciprocating Slasher Mower with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
ebay pto travel shaft semi truck push shaft We massive 1000 pto shaft warmly bmw propshaft welcome pto defend elements the s10 ls swap driveshaft buddies supra driveshaft from getah travel shaft all jeep jku driveshaft the mazdaspeed 6 travel shaft entire world!
HangZhou EPT Machinery Manufacturing unit
Product Technological Parameter
Introduction to 9GB sequence herbage mower:
Product 9gb-1.4/1.6/1.8/2.1 semi-mounted (mounted) reciprocating garden mower with 12-50 HP 4-wheel tractor for use.This machine Employs offset crank connecting rod mechanism to generate the cutter to carry on the procedure, it is appropriate for farming, forestry, pastoral location flat pasture and sloping land, hilly land and other different situations of pasture, used for harvesting normal forage and planting forage, alfalfa, reed, environmentally friendly storage forage and so on, also can prune the large lawn of manor, golf program and so on.The tractor power output shaft drives the reducing movement of the cutter, the 3-stage suspension mechanism contro EPT the increase and slide of the equipment and contro EPT the tractor power output mechanism to comprehend the motion or quit of the cutter.
The device is operated by the tractor driver by yourself, with very good maneuverability. In situation of obstacles, the hydraulic gadget of the tractor can be operated to raise the cutter.The equipment has the attributes of straightforward structure, straightforward operation, potent slicing, minimal stubble and neat, trustworthy use and so on.
Complex Parameters:
Model | 9GB-1.4 | 9GB-1.6 | 9GB-1.eight | 9GB-2.1 |
Slicing width(M) | 1.four | 1.6 | one.eight | two.one |
Stubble peak(mm) | 50~ninety | |||
Operating speed(Km/H) | 5~eight | |||
Doing work efficiency | .8 | 1 | 1.one | one.three |
Crop diameter(mm) | ≤38 | |||
Tractor output pace(R/M) | 540 or 760 | |||
Linkage | Four-wheel tractor with 3-point suspension | |||
Match electricity(HP) | twelve~forty | 18~forty | eighteen~forty | 20~fifty |
Product Images:
Packing & delivery:
Standard packing or EPT packing according to your need.
To assure safe and f EPT shipping and delivery of items to consumers.
Our Firm :
Organization type | Manufacturer |
Area | Shiliwang Industrial Zone of HangZhou, ZheJiang ,China |
Yr Established | 2003 |
Occupied region | 50 Acres |
Organization certification | CE, ISO9001, SGS |
Major product | disc harrow, disc plough, trailer, growth sprayer , rotary tillers, potato planter ,plowing blade, plough blade, soil-loosening shovel and so on. With very good quality and excellent efficiency, our products are annually exported to nations around the world close to the entire world, and we have received complete have confidence in from our buyers. |
:
After-income Service:
12 months guarantee period of time of the main components. We will send the guarantee elements jointly with the equipment in your next buy or we can deliver them by air express if you need it urgently.
FAQ:
one. Q: Full price tag record for these merchandise
A: Make sure you understand we have a very broad solution assortment, normally we don’t offer total merchandise price listing. Kindly remember to specify the product model, so we can quotation you accordingly.
2. Q: Company phrases
A: Shipment time: 25-40 days right after your payment
Cargo: By sea
Loading port: HangZhou port, China
Spot port: …To be encouraged
Payment: T/T, L/C
Guarantee: 1 year
three. Q: How can I get from you?
A: Make sure you ship us your enquiry record, and we will reply you within two doing work times.
4. Q: If the figure I appear for are not in your catalogue, what should I do?
A: We can develop it in accordance to your drawing or sample.
5. Q: W EPT decide on EPT for cooperation?
A: Evaluating with our opponents, we have much far more advantages as follows:
one). A lot more than 30 years experience in producing farming devices.
2). More Expert Product sales individuals to promise far better and professional services.
3). Broader solution assortment of agri devices for your selection.
four). Far more recently developed goods to highlight you amid your rivals and help you avoid price tag competition.
5). More robust functionality for mass generation and bulk shipment.
six). Greater high quality to assure greater Credit history.
7). Quicker shipping time: Only 7 days.
eight). Significantly stricter high quality examine methods ahead of cargo.
nine). Far more thoughtful soon after-sales services.
10). Much more renowned manufacturer: HONGRI brand and “CE” certificate.
11). Decrease restore price and decrease bad-review fee.
twelve). We have American branch office to demonstrate our principal merchandise there, which assists us to fasten the speed of responding to our clients’ demands.
If you have any query, you should truly feel totally free to speak to me.
Very best Needs!
Agricultural Custom Solutions Available Tractor Parts Rotavator Farm Machine Torque Limiter Power Take Off Cardan Drive Shaft
Our product range also covers locking assemblies (clamping elements/locking device), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes.
Overview
Quick Details
- Warranty:
-
1.5 years
- Applicable Industries:
-
Manufacturing Plant
- After Warranty Service:
-
Online support
- Local Service Location:
-
none, Italy
- Showroom Location:
-
ITALY
- Type:
-
Shafts
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- certificate:
-
CE
- Material:
-
Metal
- Color:
-
Yellow&Black
- Processing of yoke:
-
Forging
- Processing of tube:
-
Cold drawn
- Design:
-
Customized
- Certificate:
-
CE Certificate
Supply Ability
- Supply Ability:
- 10000 Piece/Pieces per Month cardan drive shaft
Packaging & Delivery
- Packaging Details
- carton/iron crate cardan drive shaft
- Port
- ningbo or shanghai
Online Customization
Product Information
Product Information
PTO Shaft
The power take-off (PTO) is a sophisticated mechanism, allowing implements to draw energy from the engine and transmit it to another application. It works as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The power take-off shaft (PTO shaft) is a critical component, designed and manufactured for continuous heavy-duty use. A good PTO shaft should be strong enough to bear the torsion and shear stress and minimize vibration.
Setforge, the forging subsidiary of Ever-Power Group, manufactures cold extruded PTO shafts for all types of agriculture vehicles. Our PTO shafts offer great dependability and durability during daily use.
EP Group has been internationally recognized as a reliable global supplier. Our state-of-the-art manufacturing process and experienced engineers ensure the top-quality of all Farinia components.
After Warranty Service | Video technical support |
Applicable Industries | Manufacturing Plant |
Local Service Location | Italy |
Showroom Location | Italy |
Warranty | 1.5 years |
Type | Shafts |
Place of Origin | China |
China | Zhejiang |
Brand Name | EPG |
certificate | CE |
Material | Metal |
Color | Yellow&Black |
Processing of yoke | Forging |
Processing of tube | Cold drawn |
Design | Customized |
Certificate | CE Certificate |
Product Display
Product Display
L series aluminium …
Tie Rod Cylinder H …
PTO Drive Line Gen …
CompanyInfo
Company Profile
Ever-Power Group
EPG have high-tech machinery and test equipment. We can produce world class high precision products.
Certifications
Certifications
Shipment & Payment
Our Advantages
A: Your inquiry related to our products or prices will be replied in 24 hours.
B: Protection of your sales area, ideas of design and all your private information.
C: Best quality and competitive price.
……
faq
FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
……
Quick China Delivery Heavy Duty Tractor Parts Agricultural Machinery – Supplier Manufacturer wholesaler Factory
For far more information.: Cellular/Whatpp: +8613083988828
How Can You Be Protected When Using PTO Shafts? First, make certain the shaft is shielded. This involves the driveline protect that addresses the implement driveline, and the grasp shield which handles the universal joint and PTO stub shaft on the tractor.Maintain the protect so it can work for you. PTO driveline shields are typically mounted on bearings, so they need to have to be maintained. always REPLACE the protect when it is destroyed or missing.Following, keep a safe length from it when in use. Preserve others absent, way too. How considerably? A distance of 2 times your peak is a great start off.Allow only these who totally must be in the location to be there. Hold all young children away!Always shell out attention to what is taking place. Most PTO victims have been caught by shock.If one thing goes mistaken — end the equipment take the PTO out of equipment, stop the engine and established the brake. Place the keys in your pocket before operating on the equipment.When stopping the machinery for any reason — stop of perform, lunch, repairs, or communication — just take the PTO out of equipment, stop the motor and established the brake.Highway planers, dredges, and other products need power from some form of engine in buy to execute their created perform. Without a energy get off, it would be essential to include a next motor to give the energy needed to run hydraulic pumps and other driveline hooked up tools.Established in the year 1997, we “EPG” are a trustworthy and famous Manufacturer of a wide assortment of Thresher Equipment, Thresher Gearbox and Chaff Cutters. We are a Proprietor company, which is situated in HangZhou. We provide these products in assorted specifications to achieve the full fulfillment of the clients. Additional, our sturdy logistic assist can make sure that these goods are delivered inside the promised time-body. Under the supervision of “Mr.Shen” (Proprietor), we have obtained massive clientele in our place.In 2008, it was awarded with “National Export Commodity Inspection-cost-free Enterprise”. EPG is specialized in design and style, company and revenue of agricultural equipment and farm implements, which has an independent import and export rights.
Overview
Swift Specifics
- Warranty:
-
1.5 many years
- Applicable Industries:
-
Production Plant
- After Guarantee Provider:
-
Online assistance
- Neighborhood Service Place:
-
None, Italy
- Showroom Area:
-
Italy
- Kind:
-
Shafts
- Area of Origin:Zhejiang, China
- Model Identify:
-
OEM
- certificate:
-
CE
- Material:
-
Metal
- Colour:
-
Yellow&Black
- Processing of yoke:
-
Forging
- Processing of tube:
-
Chilly drawn
- Design:
-
Customized
- Certificate:
-
CE Certification
Supply Capability
- Offer Ability:
- 20000 Piece/Parts for each Thirty day period
Packaging & Delivery
- Packaging Information
- Packing information:Iron pallet&wooden carton&common export packaging
- Port
- ningbo or shanghai
On-line Customization
Merchandise Information
Solution Details
PTO Shaft
The electricity just take-off (PTO) is a advanced system, permitting implements to attract power from the motor and transmit it to yet another software. It works as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The electrical power take-off shaft (PTO shaft) is a vital component, developed and made for ongoing weighty-duty use. A good PTO shaft must be robust adequate to bear the torsion and shear stress and decrease vibration.
Setforge, the forging subsidiary of Ever-Electricity Group, manufactures cold extruded PTO shafts for all kinds of agriculture automobiles. Our PTO shafts supply excellent dependability and durability in the course of every day use.
EP Group has been internationally recognized as a reliable worldwide provider. Our state-of-the-artwork manufacturing method and knowledgeable engineers make certain the best-top quality of all Farinia factors.
Soon after Guarantee Support | Movie specialized help |
Relevant Industries | Production Plant |
Neighborhood Support Location | Italy |
Showroom Area | Italy |
Warranty | 1.five years |
Variety | Shafts |
Place of Origin | China |
China | Zhejiang |
Manufacturer Name | EPG |
certification | CE |
Materials | Steel |
Shade | Yellow&Black |
Processing of yoke | Forging |
Processing of tube | Chilly drawn |
Design and style | Tailored |
Certificate | CE Certificate |
Product Display
Solution Screen
PTO Drive Line Gen …
CAT 3 Swift Hitch
6″ Large Obligation Eart …
CompanyInfo
Company Profile
At any time-Electrical power Team
EPG have large-tech machinery and check tools. We can produce world course substantial precision goods.
Certifications
Certifications
Shipment & Payment
Our Benefits
A: Your inquiry relevant to our merchandise or costs will be replied in 24 several hours.
B: Security of your product sales region, suggestions of design and style and all your non-public info.
C: Best quality and aggressive value.
……
faq
FAQ
one) How can I area order?
A: You can get in touch with us by electronic mail about your purchase information, or spot get on line.
2) How can I shell out you?
A: After you verify our PI, we will request you to shell out. T/T (HSBC financial institution) and Paypal, Western Union are the most typical approaches we are utilizing.
……
EPG – 1 of the greatest transmission manufacturing unit in China, principal merchandise: worm geared motors, agricultrual gearbox, planetary gear drive, helical,screw, beve gears and spare components and agricultural elements manunfacuter in China /For a lot more info.: Mobile/Whatpp: +8613083988828
High China Quality Popular Agricultural Tractor Parts Pto Clutch – Supplier Manufacturer wholesaler Factory
For more data.: Cell/Whatpp: +8613083988828
If you are interested in any of our goods or would like to examine a potential order, remember to really feel cost-free to get in touch with us. “EPG” brand name rotocultivator ploughshares in T.S. complete lines made in our manufacturing facility have been examined and appraised by the Ministry of Agriculture and have attained the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China.
Overview
Swift Specifics
- Guarantee:
-
1.5 years
- Applicable Industries:
-
Producing Plant
- Following Warranty Support:
-
On the web assistance
- Nearby Service Location:
-
None, Italy
- Showroom Area:
-
Italy
- Kind:
-
Shafts
- Location of Origin:Zhejiang, China
- Brand Title:
-
OEM
- certificate:
-
CE
- Material:
-
Metallic
- Color:
-
Yellow&Black
- Processing of yoke:
-
Forging
- Processing of tube:
-
Chilly drawn
- Style:
-
Tailored
- Certification:
-
CE Certificate
Offer Ability
- Offer Capability:
- 10000 Piece/Items per Month
Packaging & Shipping and delivery
- Packaging Information
- carton/iron crate
- Port
- ningbo or shanghai
On-line Customization
Item Info
Product Data
PTO Shaft
The power consider-off (PTO) is a innovative mechanism, enabling implements to attract power from the motor and transmit it to another application. It works as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The power consider-off shaft (PTO shaft) is a vital part, made and manufactured for steady weighty-responsibility use. A excellent PTO shaft need to be sturdy enough to bear the torsion and shear anxiety and reduce vibration.
Setforge, the forging subsidiary of Ever-Electrical power Team, manufactures cold extruded PTO shafts for all types of agriculture vehicles. Our PTO shafts supply wonderful dependability and longevity for the duration of daily use.
EP Group has been internationally identified as a trustworthy world-wide provider. Our state-of-the-art producing procedure and experienced engineers guarantee the top-good quality of all Farinia factors.
Soon after Guarantee Provider | Movie specialized help |
Applicable Industries | Production Plant |
Nearby Services Spot | Italy |
Showroom Area | Italy |
Guarantee | 1.5 several years |
Variety | Shafts |
Spot of Origin | China |
China | Zhejiang |
Brand name Identify | EPG |
certification | CE |
Materials | Steel |
Color | Yellow&Black |
Processing of yoke | Forging |
Processing of tube | Chilly drawn |
Design | Custom-made |
Certification | CE Certification |
Item Show
Product Screen
six” Rock Auger
fifteen” Rock Auger
Agricultural Gearb …
CompanyInfo
Firm Profile
Ever-Power Group
EPG have higher-tech machinery and examination equipment. We can produce globe class substantial precision items.
Certifications
Certifications
Cargo & Payment
Our Rewards
A: Your inquiry relevant to our products or prices will be replied in 24 hours.
B: Safety of your product sales region, concepts of style and all your private info.
C: Greatest high quality and aggressive cost.
……
faq
FAQ
one) How can I place get?
A: You can make contact with us by electronic mail about your buy particulars, or location get on line.
2) How can I spend you?
A: After you affirm our PI, we will ask for you to shell out. T/T (HSBC financial institution) and Paypal, Western Union are the most common techniques we are using.
……
EPG – 1 of the most significant transmission manufacturing unit in China, primary merchandise: worm geared motors, agricultrual gearbox, planetary gear drive, helical,screw, beve gears and spare elements and agricultural parts manunfacuter in ChinaFor more data.: Cell/Whatpp: +8613083988828