We – EPG Group the most significant agricultural gearbox and pto factory in China with 5 various branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Once the PTO has started to energy the attachment, steadily boost the throttle right up until you attain the working pace. The standard working RPM (revolutions for each moment) for a tractor mounted PTO is 540 RPM, though there are tractor versions that rev greater. Always refer to your specific tractor product for instructions prior to initial-time use. –Pushed (outer) yoke exact same as push yoke but is mounted on the employ. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one particular of four designs: spherical, sq., rectangle or splined. Metric are: bell, star or football formed. In both case the major (front) shaft is the identical form as the secondary shaft, only larger so that the secondary shaft suits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning motion these kinds of as a bailer. All shafts have to be sized just before use. Attach the implement to the three pt. and raise and help it. Attach the appropriate end to the tractor and attempt to connect the other to the employ. If the shaft is as well prolonged trim one of the shafts with a hack noticed and try out it once more until finally it matches. This allows for the apply to be elevated without binding. The shafts should overlap as much as permitted. pto shaft stuck on implement grease pto shaft EPG kubota pto shaft is john deere pto stub shaft specialised pto shaft at rural king in entrance travel shaft alternative layout, pto overrun clutch ford 8n maker clio 182 driveshaft and ford f250 push shaft revenue push shaft toyota camry of agricultural machinery and farm implements, which has an independent import and export legal rights.
Hot Sale Regular Cell: +86-13083988828escopic Welded Cardan Shaft
SWC-BH kind cardan shaft coupling is a sort of the most frequently utilised with the traits of its construction can not in the very same axis or axis angle or bigger axial movement of two huge equiangular ongoing rotary pace, and reliably transfer torque and movement. It can be commonly utilised in metallurgy, lifting, transportation, mining, petroleum, shipbuilding, coal, rubber, paper equipment and other hefty machinery business equipment shaft in the transmission torque.
♦Basic Parameter And Principal Dimension
Model | Tn kN • m |
T. |
p (.) |
LS mm |
Lmin | Dimension mm |
I kg. m2 | m kg |
|||||||||||
Di js11 |
d2 H7 |
Da | Lm | n-d | k | t | b h9 |
g | Lmin | 100mm | Lmin | 100mm | |||||||
SWC58BH | fifty eight | .fifteen | .075 | ≤22 | 35 | 325 | 47 | 30 | 38 | 35 | 4-5 | 3.five | 1.five | – | – | – | – | 2.2 | – |
SWC65BH | 65 | .25 | .a hundred twenty five | ≤22 | 40 | 360 | 52 | 35 | 42 | 46 | four-six | four.5 | one.seven | – | – | – | – | three. | – |
SWC75BH | seventy five | .fifty | .25 | ≤22 | 40 | 395 | 62 | 42 | 50 | fifty eight | 6-six | 5.5 | two. | – | – | – | – | 5. | – |
SWC90BH | ninety | one. | .fifty | ≤22 | forty five | 435 | seventy four.5 | forty seven | fifty four | fifty eight | 4-eight | six. | two.5 | – | – | – | – | 6.six | – |
SWC100BH | 100 | one.5 | .seventy five | ≤25 | fifty five | 390 | 84 | fifty seven | 60 | 58 | 6-9 | seven | 2.5 | – | – | .0044 | .00019 | 6.one | .35 |
SWC120BH | one hundred twenty | 2.5 | one.twenty five | ≤25 | 80 | 485 | 102 | 75 | 70 | 68 | eight-eleven | eight | 2.5 | – | – | .0109 | .00044 | ten.eight | .55 |
SWC150BH | 150 | 5 | two.5 | ≤25 | 80 | 590 | thirteen. | 90 | 89 | eighty | 8-13 | ten | three. | – | – | .0423 | .00157 | 24.5 | .eighty five |
SWC160BH | one hundred sixty | 10 | five | ≤25 | eighty | 660 | 137 | a hundred | ninety five | a hundred and ten | 8-15 | 15 | three. | twenty | 12 | .1450 | .0060 | 68 | 1.seventy two |
SWC180BH | a hundred and eighty | 20 | ten | ≤25 | 100 | 810 | one hundred fifty five | one zero five | 114 | 130 | eight-seventeen | seventeen | 5. | 24 | 14 | .1750 | .0070 | 70 | 2.eight |
SWC200BH | 200 | 32 | 16 | ≤15 | one hundred ten | 860 | one hundred seventy | a hundred and twenty | 127 | one hundred thirty five | 8-17 | 19 | 5. | 28 | sixteen | .3100 | .0130 | 86 | 3.6 |
SWC225BH | 225 | forty | twenty | ≤15 | one hundred forty | 920 | 196 | 135 | 152 | one hundred twenty | eight-17 | twenty | 5. | 32 | nine. | .5380 | .0234 | 122 | four.nine |
SWC250BH | 250 | 63 | 31.five | ≤15 | a hundred and forty | 1035 | 218 | a hundred and fifty | 168 | one hundred forty | eight-19 | 25 | six. | 40 | twelve.5 | .9660 | .0277 | 172 | five.3 |
SWC285BH | 285 | ninety | forty five | ≤15 | a hundred and forty | 1190 | 245 | one hundred seventy | 194 | 160 | 8-21 | 27 | 7. | forty | 15. | two.0110 | .0510 | 263 | 6.3 |
SWC315BH | 315 | 125 | sixty three | ≤15 | 140 | 1315 | 280 | 185 | 219 | one hundred eighty | ten-23 | 32 | eight. | 40 | 15. | 3.6050 | .0795 | 382 | 8. |
SWC350BH | 350 | a hundred and eighty | 90 | ≤15 | one hundred fifty | 1410 | 310 | 210 | 267 | 194 | ten-23 | 35 | eight. | 50 | 16. | seven.0530 | .2219 | 582 | 15. |
SWC390BH | 390 | 250 | one hundred twenty five | ≤15 | one hundred seventy | 1590 | 345 | 235 | 267 | 215 | 10-25 | forty | 8. | 70 | 18. | twelve.164 | .2219 | 738 | fifteen. |
SWC440BH | 440 | 355 | 180 | ≤15 | 190 | 1875 | 390 | 255 | 325 | 260 | sixteen-28 | forty two | 10 | 80 | 20. | 21.420 | .4744 | 1190 | 21.7 |
SWC490BH | 490 | five hundred | 250 | ≤15 | one hundred ninety | 1985 | 435 | 275 | 325 | 270 | 16-31 | 47 | 12 | 90 | 22.5 | 32.860 | .4744 | 1452 | 21.seven |
SWC550BH | 550 | 710 | 355 | ≤15 | 240 | 2300 | 492 | 320 | 426 | 305 | 16-31 | fifty | twelve | one hundred | 22.5 | sixty eight.920 | 1.3570 | 2380 | 34 |
·Marking Case in point:
SWC 350BH Standard telescopic welded cardan shaft,Length=1610mm
SWC 350BH*1610cardan shaft JB5513-91
·Note:
1.Tf-Torque permitted by tiredness toughness beneath varible load
two.Lmin-Least size soon after shortening
3.L-Set up size as necessary
♦Product Show
♦Other Items List
Transmission Machinery Parts Name |
Design |
Universal Coupling | WS,WSD,WSP |
Cardan Shaft | SWC,SWP,SWZ |
Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
Higher Flexible Coupling | LM |
Chain Coupling | GL |
Jaw Coupling | LT |
Grid Coupling | JS |
♦Our Company
Our organization supplies various kinds of goods. Higher top quality and reasonable price. We stick to the basic principle of “high quality 1st, provider first, steady improvement and innovation to satisfy the buyers” for the administration and “zero defect, zero issues” as the good quality aim. To perfect our service, we give the products with very good high quality at the affordable cost.
Welcome to customise items from our factory and you should provide your design drawings or make contact with us if you need to have other requirements.
♦Our Services
one.Style Solutions
Our layout staff has knowledge in cardan shaft relating to solution style and improvement. If you have any requirements for your new solution or wish to make even more improvements, we are listed here to provide our assist.
two.Solution Companies
raw components → Slicing → Forging →Rough machining →Shot blasting →Heat therapy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Treatment
We could produce the sample according to your need and amend the sample continuously to meet up with your want.
4.Investigation & Improvement
We normally study the new demands of the market and produce the new model when there is new autos in the industry.
5.Quality Manage
Each and every action should be unique examination by Professional Employees in accordance to the common of ISO9001 and TS16949.
♦FAQ
Q 1: Are you investing firm or company?
A: We are a skilled manufacturer specializing in manufacturing
numerous series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the consumers with personalized artworks of PDF or AI structure.
Q 3:How extended is your shipping time?
Generally it is twenty-30 times if the goods are not in stock. It is in accordance to quantity.
Q 4: Do you supply samples ? Is it free of charge or extra ?
Sure, we could offer the sample but not for totally free.Really we have a really good price tag basic principle, when you make the bulk get then expense of sample will be deducted.
Q 5: How lengthy is your warranty?
A: Our Guarantee is twelve thirty day period underneath regular circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection methods for coupling ?
A:a hundred% self-inspection just before packing.
Q 8: Can I have a go to to your manufacturing unit ahead of the buy?
A: Positive,welcome to check out our manufacturing facility.
Q nine: What is your payment?
A:one) T/T. 2) L/C
♦Contact Us
Web:
Incorporate: No.one Fuyang Road,Chengnan park,Jingjiang Town,Jiangsu Province,China
The use of original products manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the detailed replacement parts contained herein are not sponsored, accredited, or made by the OEM.