Product Description
Product Description
Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.How long is your delivery time and shipment?
30-45days
| Type: | Pto Shaft |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor |
| Material: | 45cr Steel |
| Power Source: | Pto Dirven Shaft |
| Weight: | 8-15kg |
| After-sales Service: | Online Support |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do manufacturers ensure the compatibility of drive shafts with different equipment?
Manufacturers employ various strategies and processes to ensure the compatibility of drive shafts with different equipment. Compatibility refers to the ability of a drive shaft to effectively integrate and function within a specific piece of equipment or machinery. Manufacturers take into account several factors to ensure compatibility, including dimensional requirements, torque capacity, operating conditions, and specific application needs. Here’s a detailed explanation of how manufacturers ensure the compatibility of drive shafts:
1. Application Analysis:
Manufacturers begin by conducting a thorough analysis of the intended application and equipment requirements. This analysis involves understanding the specific torque and speed demands, operating conditions (such as temperature, vibration levels, and environmental factors), and any unique characteristics or constraints of the equipment. By gaining a comprehensive understanding of the application, manufacturers can tailor the design and specifications of the drive shaft to ensure compatibility.
2. Customization and Design:
Manufacturers often offer customization options to adapt drive shafts to different equipment. This customization involves tailoring the dimensions, materials, joint configurations, and other parameters to match the specific requirements of the equipment. By working closely with the equipment manufacturer or end-user, manufacturers can design drive shafts that align with the equipment’s mechanical interfaces, mounting points, available space, and other constraints. Customization ensures that the drive shaft fits seamlessly into the equipment, promoting compatibility and optimal performance.
3. Torque and Power Capacity:
Drive shaft manufacturers carefully determine the torque and power capacity of their products to ensure compatibility with different equipment. They consider factors such as the maximum torque requirements of the equipment, the expected operating conditions, and the safety margins necessary to withstand transient loads. By engineering drive shafts with appropriate torque ratings and power capacities, manufacturers ensure that the shaft can handle the demands of the equipment without experiencing premature failure or performance issues.
4. Material Selection:
Manufacturers choose materials for drive shafts based on the specific needs of different equipment. Factors such as torque capacity, operating temperature, corrosion resistance, and weight requirements influence material selection. Drive shafts may be made from various materials, including steel, aluminum alloys, or specialized composites, to provide the necessary strength, durability, and performance characteristics. The selected materials ensure compatibility with the equipment’s operating conditions, load requirements, and other environmental factors.
5. Joint Configurations:
Drive shafts incorporate joint configurations, such as universal joints (U-joints) or constant velocity (CV) joints, to accommodate different equipment needs. Manufacturers select and design the appropriate joint configuration based on factors such as operating angles, misalignment tolerances, and the desired level of smooth power transmission. The choice of joint configuration ensures that the drive shaft can effectively transmit power and accommodate the range of motion required by the equipment, promoting compatibility and reliable operation.
6. Quality Control and Testing:
Manufacturers implement stringent quality control processes and testing procedures to verify the compatibility of drive shafts with different equipment. These processes involve conducting dimensional inspections, material testing, torque and stress analysis, and performance testing under simulated operating conditions. By subjecting drive shafts to rigorous quality control measures, manufacturers can ensure that they meet the required specifications and performance criteria, guaranteeing compatibility with the intended equipment.
7. Compliance with Standards:
Manufacturers ensure that their drive shafts comply with relevant industry standards and regulations. Compliance with standards, such as ISO (International Organization for Standardization) or specific industry standards, provides assurance of quality, safety, and compatibility. Adhering to these standards helps manufacturers meet the expectations and requirements of equipment manufacturers and end-users, ensuring that the drive shafts are compatible and can be seamlessly integrated into different equipment.
8. Collaboration and Feedback:
Manufacturers often collaborate closely with equipment manufacturers, OEMs (Original Equipment Manufacturers), or end-users to gather feedback and incorporate their specific requirements into the drive shaft design and manufacturing processes. This collaborative approach ensures that the drive shafts are compatible with the intended equipment and meet the expectations of the end-users. By actively seeking input and feedback, manufacturers can continuously improve their products’ compatibility and performance.
In summary, manufacturers ensure the compatibility of drive shafts with different equipment through a combination of application analysis, customization, torque and power capacity considerations, material selection, joint configurations, quality control and testing, compliance with standards, and collaboration with equipment manufacturers and end-users. These efforts enable manufacturers to design and produce drive shafts that seamlessly integrate with various equipment, ensuring optimal performance, reliability, and compatibility in different applications.
How do drive shafts handle variations in load and vibration during operation?
Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:
1. Material Selection and Design:
Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.
2. Torque Capacity:
Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.
3. Dynamic Balancing:
During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.
4. Dampers and Vibration Control:
Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.
5. CV Joints:
Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.
6. Lubrication and Maintenance:
Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.
7. Structural Rigidity:
Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.
8. Control Systems and Feedback:
In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.
In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.
How do drive shafts contribute to transferring rotational power in various applications?
Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:
1. Vehicle Applications:
In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.
2. Machinery Applications:
In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.
3. Power Transmission:
Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.
4. Flexible Coupling:
One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.
5. Torque and Speed Transmission:
Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.
6. Length and Balance:
The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.
7. Safety and Maintenance:
Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.
In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.
editor by CX 2023-11-14
China 1 Series Connect Triangle Tube Yokes PTO Shaft Components Driveline Parts For Farm Tractor Agriculture Machinery with Great quality
Condition: New
Warranty: 1 12 months
Applicable Industries: Producing Plant, Machinery Restore Outlets, Farms, Retail, Design performs
Fat (KG): 1.5 KG
Showroom Place: None
Online video outgoing-inspection: Provided
Equipment Examination Report: Provided
Advertising and marketing Type: Regular Product
Sort: Tube Yokes
Use: Tractors
Product title: Triangle Tube Yokes PTO Shaft Components Driveline Components
Color: Silver, Yellow,black,OEM
Function: Power transmission
Search term: PTO Drive Shaft Tube yoke
MOQ: one
Technics: Forge, Chilly-Drawn
Packing depth: pp bag + paper box
Substance: 40Cr,45#
Emission Normal: Euro II
Dimensions: OEM
Packaging Particulars: Shaft Areas -> Plastic Bag -> White/Coloration box -> Carton -> Pallet
Port: HangZhou or ZheJiang
Item Overview one Series Hook up Triangle Tube Yokes PTO Shaft Factors Driveline Components For Farm Tractor Agriculture Equipment Merchandise Specifications
| Name | 1 Sequence Connect Triangle Tube Yokes PTO Shaft Parts Driveline Areas For Farm Tractor Agriculture Machinery |
| Advantage | We are 1 specialist maker of all types driveline, Pto shaft and areas.Our manufacturing facility Protect an region of 13320. |
| Application | Kinds of Tractors & Farm Implements |
| Parts | Japanese tractor transmission clutch disc areas for B1400 B7000 |
| Processing Of Yoke | Forging |
| Plastic Cover | YWBWYSBSEtc |
| Color | GreenOrangeYellowBlack Ect. |
| Series | T1-T10 L1-L6S6-S1010HP-150HP with SA,RA, HangZhou CZPT industrial air compressor steam turbine compressor SB,SFF,WA,CV, And so forth |
| Tube Sort | Lemon,Trianglar,Star,Sq.,Hexangular,Spline,Unique, Ect |
| Spline Variety | 1 1/8″ Z61 3/8″ Z6 1 3/8″ Z21 1 3/4″ Z20 1 3/4″ Z6 8-38*32*6 8-forty two*36*7 8-48*forty two*8 Head Gasket Bolts Set Suit For Md976845 Md97-6845 Engine Areas Complete Gasket Established Package |
| Tractor Design we can provide | B1500/1400,B5000,B6000, B7000, TU1400, TX1400, TX1500, YM F1401, YM1400 And many others. |
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
editor by Cx 2023-06-21
China Made in China Die Forging Alloy Steel Farm Tractor Spare Parts Drive Axle Driveshaft Boots custom drive shaft
Product Description
1
Products
Identify: Made in china die forging alloy steel farm tractor spare parts travel axle driveshaft boots
Content: 40CrMo
Excess weight: From .2kg-5kg
Packing: wood case
Min purchase: 1000pcs
Personalized creation is accessible as your drawings or sample.
| Approach | Die Forging | |
| Materials | Stainless Metal, Carbon Metal, Alloy Steel | |
| Fat | 0.1Kg~20Kg | |
| Warmth Therapy | Quenching, Annealing,Tempering,Normalizing, Quenching and Tempering | |
| Testing instrument | composition screening | Spectrometer, Metallographic microscope |
| Functionality tests | Hardness tester, Tensile tests device | |
| Size Measuring | CMM,Micrometer, Vernier Caliper, Depth Caliper, feeler gauge | |
| Thread Gauge , Peak Gauge | ||
| Roughness | Ra1.6~Ra6.three | |
| Machining Products | CNC Heart , CNC Devices, Turning, Drilling, Milling, boring machine,Grinding Equipment, | |
| Wire EDM,Laser Chopping&Welding, Plasma Cutting &Welding, EDM and many others. | ||
| Good quality control | Sampling inspection of raw components and semi-completed merchandise, one hundred% Inspection of finished products | |
| Surface Treatment method | Shot Blast , Powder Coating, Sharpening, Galvanized , Chrome Plated | |
| Production Potential | 60000T / Years | |
| Direct Time | Normally thirty – 45 Times. | |
| Payment Conditions | T/T , L/C | |
| Substance Regular | ASTM , AISI , DIN , BS, JIS, GB, | |
| Certification | ISO9001:2008, IATF16949:2016 | |
two
Products Quality Management
Quality management entail the inspection and manage of incoming resources, generation procedures, and completed goods.
The quality manage method involves,
one 1st of all, the incoming uncooked resources with random sampling are analyzed by metallographic microscope to make certain that the chemical composition meets the generation requirements
two Then In the generation method, there are QC staffs well timed sampling guarantee that the items are free of charge of defects in the manufacturing method, and to coordinate and deal with any irregular top quality concerns may be transpired.
three The last stage of creation method is magnetic particle flaw detector of the metallic components to detect it truly is hidden crack or other flaws.
four All the finished steel parts is sampled in proportion and sent to the laboratory for numerous mechanical functionality tests and size measurement, and the surface quality is manually 100% inspected.
The relevant tests products photographs are as subsequent:
3
Good quality Administration System Handle:
We strictly carry out program management accordance with iso9001 and ts16949 quality requirements. And 5S lean creation management is executed on the production site.
The manufacturing management site as subsequent:
4
Our Advantages:
Model
Our parent organization, HiHangZhou Team, is a entire world-renowned higher-finish equipment producing enterprise with 40 domestic subsidiaries and branches and 8 foreign manufacturing vegetation. Has prolonged-expression encounter and very good reputation in cooperation with planet-renowned enterprises.
Technology
We have a comprehensive generation process and gear analysis and development capabilities for ferrous metals forming. More than twenty five a long time of production expertise in forging equipment and casting products producers, make us a lot more thoroughly get all the functionality of each equipment. One-3rd of our firm’s employees are technician and R&D staff, making certain that substantial-good quality merchandise are developed with large effectiveness.
Services
We can supply personalized and normal production services with a number of producing procedure integrations. The high quality and supply of products can be totally guaranteed, and the ability to communicate swiftly and effectively.
Society
The special corporate lifestyle can give full play to the potential of people and give a sturdy vitality for the sustainable development of the firm.
Social duty
Our company strictly implements low-carbon environmental safety, vitality-preserving and emission-reduction manufacturing, and is a benchmark company in regional region.
5
Firm Culture
Our Vision
To turn into 1 of the top businesses
Our Mission
To grow to be a platform for personnel to comprehend their aspiration
To grow to be 1 of the reworking and upgrading pacemaker of Chinese enterprises
To set the countrywide manufacturers with pride
Our Perception
Strive to develop the business into an best platform for business owners to comprehend their self-worth and add to the modern society
Values
Advancement is innovation, every person can innovate
innovation impressed and failures tolerated
six
FAQ
1.
Q: Are you a buying and selling company or a producer?
A: Clearly we are a manufacturer of forging merchandise, casting merchandise and also have a large amount of machining abilities.
two.
Q: What series items do your have?
A: We are primarily engaged in forming processing of ferrous metals, including processing by casting , forging and machining. As you know, these kinds of equipment components can be noticed in numerous industries of products manufacturing.
3
Q: Do you supply samples? is it totally free?
A: Indeed, we typically provide samples in accordance to the traditional follow, but we also need clients to offer a freight spend-by-account quantity to display mutual sincerity of cooperation.
four
Q: Is OEM available?
A: Yes, OEM is available.
five
Q: What’s your quality ensure?
A: We insist that the survival of the firm must count on the products top quality ongoing enhancement, with no which we can’t endure for long. We carry out strictly merchandise good quality manage for every single method from incoming resources, generation approach to finished goods by way of sophisticated detection instrument and tools. We also invite unbiased third get-togethers to certify our top quality and administration methods. Until now we have handed ISO/TS16949 and SGS certification .
six
Q. How about the Packing?
A: We typically use the iron box, or wooden case, also it can be customized in accordance to customer’s demands.
7
Q: What is your minimum buy quantity?
A: Of course, we require all global orders to have an minimal get quantity. The amount is up to the specific products feature or residence such as the substance, excess weight, design etc.
8
Q: What is the direct time?
A: Typically our forging goods and casting merchandise require to make new dies or molds, the time of producing new dies or molds and samples within 30-45 days, and the huge batch generation time in 30-45 times. it’s also according to the areas structural complexity and amount.
nine
Q: What types of payment approaches do you take?
A: You can make the payment by T/T or L/C. thirty% deposit in progress, 70% stability in opposition to the duplicate of B/L.
Certification
|
US $3-20 / Piece | |
1,000 Pieces (Min. Order) |
###
| Processing Object: | Metal |
|---|---|
| Molding Style: | Forging |
| Molding Technics: | Pressure Casting |
| Application: | Agricultural Machinery Parts |
| Material: | Steel |
| Heat Treatment: | Tempering |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Process | Die Forging | |
| Material | Stainless Steel, Carbon Steel, Alloy Steel | |
| Weight | 0.1Kg~20Kg | |
| Heat Treatment | Quenching, Annealing,Tempering,Normalizing, Quenching and Tempering | |
| Testing instrument | composition testing | Spectrometer, Metallographic microscope |
| Performance testing | Hardness tester, Tensile testing machine | |
| Size Measuring | CMM,Micrometer, Vernier Caliper, Depth Caliper, feeler gauge | |
| Thread Gauge , Height Gauge | ||
| Roughness | Ra1.6~Ra6.3 | |
| Machining Equipment | CNC Center , CNC Machines, Turning, Drilling, Milling, boring machine,Grinding Machines, | |
| Wire EDM,Laser Cutting&Welding, Plasma Cutting &Welding, EDM etc. | ||
| Quality control | Sampling inspection of raw materials and semi-finished products, 100% Inspection of finished products | |
| Surface Treatment | Shot Blast , Powder Coating, Polishing, Galvanized , Chrome Plated | |
| Production Capacity | 60000T / Years | |
| Lead Time | Normally 30 – 45 Days. | |
| Payment Terms | T/T , L/C | |
| Material Standard | ASTM , AISI , DIN , BS, JIS, GB, | |
| Certification | ISO9001:2008, IATF16949:2016 | |
|
US $3-20 / Piece | |
1,000 Pieces (Min. Order) |
###
| Processing Object: | Metal |
|---|---|
| Molding Style: | Forging |
| Molding Technics: | Pressure Casting |
| Application: | Agricultural Machinery Parts |
| Material: | Steel |
| Heat Treatment: | Tempering |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Process | Die Forging | |
| Material | Stainless Steel, Carbon Steel, Alloy Steel | |
| Weight | 0.1Kg~20Kg | |
| Heat Treatment | Quenching, Annealing,Tempering,Normalizing, Quenching and Tempering | |
| Testing instrument | composition testing | Spectrometer, Metallographic microscope |
| Performance testing | Hardness tester, Tensile testing machine | |
| Size Measuring | CMM,Micrometer, Vernier Caliper, Depth Caliper, feeler gauge | |
| Thread Gauge , Height Gauge | ||
| Roughness | Ra1.6~Ra6.3 | |
| Machining Equipment | CNC Center , CNC Machines, Turning, Drilling, Milling, boring machine,Grinding Machines, | |
| Wire EDM,Laser Cutting&Welding, Plasma Cutting &Welding, EDM etc. | ||
| Quality control | Sampling inspection of raw materials and semi-finished products, 100% Inspection of finished products | |
| Surface Treatment | Shot Blast , Powder Coating, Polishing, Galvanized , Chrome Plated | |
| Production Capacity | 60000T / Years | |
| Lead Time | Normally 30 – 45 Days. | |
| Payment Terms | T/T , L/C | |
| Material Standard | ASTM , AISI , DIN , BS, JIS, GB, | |
| Certification | ISO9001:2008, IATF16949:2016 | |
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
editor by czh 2022-12-14
Best wholesaler made in China – replacement parts – PTO shaft manufacturer & factory South kubota pto shaft cap Africa Hot Sale Farm Machinery Dq554 55HP 4X4 4WD Compact Mini Farm Tractor with Cabin with ce certificate top quality low price
We – EPG Team the biggest agricultural gearbox and pto factory in China with 5 various branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
2008 jeep liberty entrance travel shaft Principal ag pto shafts merchandise pto shaft for kubota tractor consist of: tom woods driveshaft jk manure google drive shaft 2019 spreading one thousand pto to 540 adapter truck, pto shaft inventory potato locking pin for pto shaft planting/harvesting concentrate st225 driveshaft device, 2000 bmw 323i generate shaft disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, blend rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing movie, plough tip and share, cultivator tine, casting areas and many others. EPG Machinery is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our manufacturing facility to HangZhou worldwide airport. Large High quality Dq554 55HP 4 wheel drive Modest wheel compact Farming Tractor Sizzling Sale in Peru
Tractor Primary Features and Benefits:
one.Outfitted well-known manufacturer motor demonstrating sophisticated ability, minimal gas consumption and high financial performance.
2. Streamlined look layout, lovely and generous.
three.Transmission Scenario adopt meshed change and include the gearbox interlock device tends to make the procedure far more smoothly, trustworthy and simpler.
four. Double motion clutch with disc spring, perform steadily and simple to work.
five. Fully hydraulic steering program tremendously reduced driver’s function power.
six. Moist disc brake gadget, trustworthy brake functionality.
seven. Independent injection of hydraulic oil, dependable to run.
8. The lifter with drive and position adjustment, with reputable lift.
9. Tractor PTO:
PTO in Double pace : 540/one thousand, 760/a thousand, 540/760r/min Optional, For high doing work efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural tools of all more than the planet.
10. Total sequence light, ROPS,Sunshade/Cover, Admirer/Heater/Air-conditioned cabin are all available, for much more relaxed driving atmosphere.
Tractor Main specificaiton and Specialized parameters:
| Tractor Design | DQ554 |
| Drive variety | 4×4 |
| Engine | |
| Variety of engine | Xinchai 4-Cylinder EPT motor |
| Potential of gasoline tank(L) | 38L |
| Engine power at rated speed | 40.5kw / 55HP |
| Rated velocity (r/min) | 2400 |
| Transmission | |
| Clutch | dry,dual-phase sort |
| PTO velocity | 540/1000rpm or 540/760rpm |
| Equipment change | 8F+4R/8F+8R/12F+12R (Optional) |
| Hydraulic system | |
| Hydraulic output valve | 2-Way (optional) |
| Three stage linkage | |
| Classification of 3-point link | rear, category II |
| Lifting force (at stage of 610mm)KN | twelve |
| Technical parameter | |
| Overall size (L x W x H)mm | 3513x1750x2130 |
| Wheel base (mm) | 2040 |
| The smallest clearance (mm) | 325 |
| Front tire | 8.3-twenty |
| Rear tire | twelve.4-28/fourteen.9-24 (optional) |
| Optional Configurations | |
| ROPS,Cover(Sunshade),Cabin with Supporter/Heater/Air-situation, 2-Team Hydraulic output valve, Front ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.9-24 big rear tire, Swing attract bar. | |
DQ554 55HP Four wheel drive Tractor detai EPT present :
EPT Manufacutring Line:
Strictly Inspecting and Complete Testing for ensuring higher top quality solution:
Tractor Packing and Loading container for Delivering goods :
Numerous Transportation modes and Shipping term to satisfy different clients demand :
Please make contact with us if you have any need for our solution :
Greatest cost will be quoted for you as before long as obtain your Necessity !
Best near me made in China – replacement parts – PTO shaft manufacturer & factory 180HP pto bolt pattern 4*4WD Machinery Construction Large Traktar Farm Agri Tractor with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft for county line tiller Our pto shaft suppliers company 1999 jeep grand cherokee travel shaft has weasler pto guard sound 6 spline pto shaft dimensions economic pto quick coupler energy, pto publish hole diggers builds na miata driveshaft up fixing pto shaft a what to do when your pto shaft will not increase technician team contingent with high good quality, possesses the generation assembly line of technicalization in China and best method checking on item quality and runs marketing networks through the region. EPG major generation is of farming 15-500 horsepower tractor supporting equipment, mechanical cultivation, harvesting machinery and components.
180HP 4*Four wheel drive Equipment EPT Large Traktar Farm Agri Tractor
one.YTO/Weichai/Yuchai Motor
2.Push Wheel:4wd(4*4)
3.Four-stroke engines with higher torque reserve.
four.Adju EPT front and rear tracks.
five.Total hydraulic steering.
Technological Parameters
| Model No. | TL1804 | |
| Kind | 4*four | |
| Motor | Model | WP6G180E330(Weichai Engine) |
| Rated power(kw) | 132.five | |
| RPM | 2200 | |
| Overall dimension (L*W*H) | 5350*2320*3000/3140 | |
| Tread(mm) | Entrance | 1760(1650,1778,1862,1888,1972,1990,2100) |
| Rear | 1750(1650~2368) | |
| Wheelbase | 2898 | |
| Clutch Type | Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven | |
| Gear Box | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation. | |
| Gear shift | 32F+24R(Shuttle gift) | |
| Weight (kg) | 6600 | |
| Tyre | Entrance | 14.9-28 |
| Rear | eighteen.4-38 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Features
1.Gasoline consumption achieve upto 1 liter/hour diesel.
two. Differential lock avoid rear whee EPT skidding when climbing, running in paddy land and rainy climate.
three.Equip with double speed of PTO shaft 540/760 rpm. Adapted to diverse field type.
four.Undertake complete hydraulic steering, impartial fuel tank, easy running and substantial mobility.
5.Adju EPT entrance and rear tracks fulfill agricultural requirements of different areas. Added-massive drinking water tank and higher capability upkeep-cost-free battery make the equipment with ideal warmth-dispersion and starting functionality.
six.Can undertake to a variety of implements,these kinds of as plough,disc plough,ratory tiller,disc harrow,and so on
Service
Pre-income services
1, 24 hrs on-line .Your inquiry will be rapid reply by electronic mail .
2,Professionally and patiently introduction,detai EPT images and doing work video to display machine .
three,Visting our manufacturing unit.
Provider on sales
one,Check every machine and inspect the device significantly .
two,Ship the machine image which you buy , then packing it with stHangZhourd export bundle after you validate the equipment is ok .
3,Shipping and delivery:If ship by sea .following supply to seaport .Will inform you the shipping time and arrival time . Finally, deliver all original documents to you by Express. We will inform you the monitoring variety right after we post the paperwork.
Right after-sales provider
one, 24 several hours on the web to remedy any difficulty . Supply you English manual e-book and complex assistance , maintain and install online video to support you remedy the problem, or dispatch worker to your manufacturing facility.
two Instruction how to install the device, coaching how to use, keep and fix the device.
FAQ
one. What is the voltage/section for this device ?
220V 50Hz/one period ,380V 50Hz/a few section .We also could produce according to customer’s prerequisite.
two. What is your terms of payment?
T/T 30% as deposit, and &70% before shipping. We will present you the photos of the merchandise and deals before you pay out the harmony.
three. What your terms of shipping and delivery?
EXW,FOB,CFR,CIF,DAF.
four. How about your delivery time?
Usually, it will consider about thirteen days soon after receipt of deposit payment. The particular shipping and delivery time depends on the products and the amount of your order.
5. What’s your MOQ?
1 established
six. How should I do if fulfill some problems while using?
We can provide English manual ebook and also just take a video for demonstrating how to solve the problems or dispatch our employee to your manufacturing unit.
Best Custom made in China – replacement parts – PTO shaft manufacturer & factory Tractor pto gear reducer Mounted Farm Implements 1lyq Serious Disc Plough with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft classes EPG e30 driveshaft specializing hydraulic pump to pto adapter in 2005 jeep liberty rear push shaft the lengthier drive shaft for lifted trucks manufacture tri oval pto shaft of pto protect rotocultivator pto plastic protect ploughshares 2002 ford explorer entrance push shaft and pto shafts slide other non-standardized farm machinery chopping resources. The company was licensed by ISO9001:2008 Quality Management System. Product Description:
This agricultural tractor disc plow for sale is designed specifically for paddy field. When it works inpaddy-field it turns up soil to make soil upturned, in lines and level. Wheat and rice stubble and Chinesemilk vetch are turned down and buried in the field they are easy to rotten and increasing the organicfertilizer of the filed. It also has advantages of saving labor, working efficiently and low cost etc.
| Sort | 1LYQ-320 | 1LYQ-420 | 1LYQ-520 | 1LYQ-522 | 1LYQ-622 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 | 1LYQ-722 | 1LYQ-822 | 1LYQ-922 | 1LYQ-822 | 1LYQ-922 | 1LYQ-1571 | 1LYQ-825 | 1LYQ-925 | 1LYQ-1571 |
| Working width (mm) | 600 | 800 | 1000 | 1100 | 1320 | 1540 | 1760 | 1980 | 1540 | 1760 | 1980 | 1760 | 1980 | 2200 | 2000 | 2250 | 2500 |
| Doing work depth (mm) | 12-20 | fourteen-22 | |||||||||||||||
| Output pace(rpm/min) | 540-740 | ||||||||||||||||
| Dia. of disc (mm) | 510 | 510 | 510 | 560 | 610 | ||||||||||||
| Excess weight (kg) | 230 | 250 | 280 | 330 | 360 | 390 | 420 | 460 | 600 | 650 | seven hundred | 700 | 750 | 800 | 850 | 900 | 950 |
| Linkage | three stage mounted with PTO shaft | ||||||||||||||||
| Matched energy (hp) | 20-thirty | twenty five-thirty | twenty five-35 | 35-45 | 40-55 | 55-65 | sixty five-75 | 70-eighty | 80-100 | eighty-one hundred | 90-a hundred and twenty | 90-a hundred and twenty | 100-a hundred and twenty | a hundred-one hundred twenty | 110-150 | ||
| Working pace(km/h) | 3-four | ||||||||||||||||
| Body sort | Circular beam | ||||||||||||||||
Detailed Photograph&Packing:
Our Company:
With more than sixteen many years of production expertise, we have produced full tillage machinery, pl EPT machinery and harvesting machinery, such as tractors, disc harrows, disc plows, mowers, rotary tillers, deep plowing machines and far more, showcasing comprehensive specifications, reputable top quality and outstanding efficiency. Our goods are not only offering properly during our country, but also exported to clientele in Europe, Africa, the Center East, Southe EPT Asia and other nations and regions. Our company integrity and quality have been extremely acknowledged. More than the a long time, we have been awarded “Degree A Tax Paying Company” and “Amount AA Lender Credit Organization”.
| Company type | Manufacturer |
| Place | Shiliwang Industrial Zone of HangZhou, ZheJiang ,China |
| Year Proven | 2003 |
| Occupied location | 50 Acres |
| Business certification | CE, ISO9001, SGS |
| Principal product | disc harrow, disc plough, trailer, increase sprayer , rotary tillers, potato planter ,plowing blade, plough blade, soil-loosening shovel and so on. With very good quality and excellent efficiency, our products are annually exported to international locations around the globe, and we have gained absolute have confidence in from our customers. |
Packing:
Following-product sales Service:
twelve months guarantee period of the main areas. We will ship the promise components jointly with the equipment in your up coming get or we can send them by air convey if you need it urgently.
FAQ:
one. Q: Full price tag list for these goods
A: Remember to comprehend we have a very broad merchandise selection, typically we don’t offer entire products price checklist. Kindly remember to specify the product model, so we can estimate you appropriately.
2. Q: Company terms
A: Shipment time: 25-40 days after your payment
Shipment: By sea
Loading port: HangZhou port, China
Vacation spot port: …To be recommended
Payment: T/T, L/C
Warranty: 1 year
3. Q: How can I get from you?
A: Remember to send us your enquiry listing, and we will reply you within two functioning days.
4. Q: If the figure I look for are not in your catalogue, what ought to I do?
A: We can build it according to your drawing or sample.
five. Q: W EPT pick EPT for cooperation?
A: Evaluating with our competition, we have considerably more positive aspects as follows:
1). A lot more than 30 years experience in manufacturing farming machines.
2). More Expert Income folks to promise greater and expert service.
3). Broader merchandise assortment of agri equipment for your choice.
4). Far more recently created items to highlight you among your opponents and help you avoid price opposition.
five). Much better capability for mass manufacturing and bulk cargo.
6). Better high quality to ensure greater Credit score.
seven). More rapidly shipping and delivery time: Only 7 times.
eight). Considerably stricter top quality examine procedures ahead of cargo.
9). A lot more thoughtful right after-sales services.
10). Far more famous brand name: HONGRI brand and “CE” certificate.
eleven). Reduced fix charge and reduce bad-evaluation rate.
twelve). We have American branch office to demonstrate our main items there, which helps us to fasten the speed of responding to our clients’ demands.
You should inform us much more about your wants,we are all looking ahead to listening to from you.
Europe near me shop made in China – replacement parts – pto clutch adjustment Ce Approved Dq1004 100HP 4WD China Cheap Big Agri Wheel Farm Tractor Hot Sale in Senegal with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto manufacturing unit in China with 5 various branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
travel shaft for 2000 chevy silverado z71 EPG 2000 chevy silverado extended cab push shaft is 2008 ford edge driveshaft ready bush hog complete mower fth720 components to john deere pto coupler cooperate howse pto shaft components sincerely 2008 f150 drive shaft and pto shaft tractor online video produce pto shaft defend tractor supply commonly rebuilt driveshafts close to me with pals! EPG specializing in the manufacture of rotocultivator ploughshares and other non-standardized farm machinery cutting tools. Europe CE approved DQ1004 100HP 4wd China cheap Big Agri wheel farm tractor sizzling sale in Senegal
Tractor Primary Characteristics and Positive aspects:
1.Outfitted popular brand engine displaying innovative capacity,minimal gasoline use,substantial economic performance.
2. Streamlined appearance style, lovely and generous.
3.Transmission Situation adopt meshed shift and add the gearbox interlock gadget helps make the operation much more easily,dependable and easier.
four. Double motion clutch with disc spring, perform steadily and effortless to run.
five. Totally hydraulic steering program significantly decreased driver’s function strength.
6. Soaked disc brake system, reliable brake efficiency.
7. Individual injection of hydraulic oil, reliable to work.
8. The lifter with power and position adjustment, with reliable raise.
nine. Tractor PTO:
PTO in Double velocity : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural tools of all above the entire world.
10. Large Chassis and Large-obligation Rear axle for Tough Sturdy machine.
11. Full series gentle, ROPS,Sunshade/Canopy, Enthusiast/Heater/Air-conditioned cabin are all obtainable, for far more relaxed driving environment.
Tractor Main specificaiton and Complex parameters:
| Tractor Product | DQ1004 |
| Drive sort | 4×4, Four wheel drive |
| Engine | |
| Motor variety | EPT or Yuchai brand, 4 cylinder EPT motor |
| Ability of gasoline tank(L) | a hundred and fifty |
| Rated velocity (r/min) | 2300 |
| Engine energy at rated speed(kw/hp) | seventy three.5kw/100HP |
| Transmission | |
| Clutch | Dry,Twin-stage sort |
| PTO Velocity (rpm) | 540/one thousand or 760/one thousand |
| Equipment shift | 8F+4R/16F+8R(optional)/8F+8R(optional) |
| Hydraulic method | |
| Hydraulic output valve | two-Team (optional) |
| Three level linkage | |
| Category of 3-stage website link | Classification II |
| Lifting force New E-mail [email protected] point of 610mm) KN | >16 |
| Technological parameter | |
| Dimension (LxWxH) (mm) | 4593x2050x2810 |
| Wheel foundation(mm) | 2195 |
| Observe foundation(mm) entrance wheel | 1610 |
| Monitor foundation(mm) rear wheel | 1620-2571 (typical 1620) |
| The smallest clearance(mm) | 379 |
| Entrance tyre | eleven.2-24 |
| Rear tyre | 16.9-34(frequent)/eighteen.4-30(optional) |
| Optional Configurations | |
| Common cabin with Fan Heater cabin AC cabin ROPS Canopy (Sunshade) 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve Front ballast, Rear ballast Paddy tire, 7.5-16 entrance tire, 18.4-30 huge rear tire, 6 cylinder EPT motor, Weighty-responsibility rear, Air brake, Swing draw bar | |
| Loading Amount/40HC | 3 Sets in Nude packing for CBU shipping |
DQ1004 100HP 4wd Tractor Detai EPT :
DQ1004 100HP 4 wheel drive Tractor have various Optional configurations for choose:
EPT Manufacutring Line:
Strictly Inspecting and Full Testing for guaranteeing substantial high quality product:
Tractor Packing, Loading container and Delivering items to Clients :
EPT after-sale provider for equally Distributors and Personal consumers:
You should contact us if you have any demand for our item :
Ideal cost will be quoted for you as before long as obtain your Need !
100HP Cost made in China – replacement parts – pto drive shaft series 4 4*4WD New Construction Medium Farm Agri Tractor with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
bare-co pto shaft guard bush hog generate shaft pin Our pto shaft star tubing business disconnect pto shaft kubota is vw touareg propshaft positioned 2001 dodge durango front travel shaft in dodge ram travel shaft XiHu 2000 jeep wrangler entrance generate shaft HangZhou 1966 mustang driveshaft Zhejiang 6 spline pto shaft Province. T
100HP 4*4 wheel drive New EPT Medium Farm Agri Tractor
Technological Parameters
| Model No. | TL1004 | |
| Type | 4*4 | |
| Engine | Model | QC4115TA |
| Rated power(kw) | seventy three.five | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 4365*2048*3060 | |
| Tread(mm) | Entrance | 1610(Can be adjusted to 1950) |
| Rear | 1620(Can be adjusted to 2571) | |
| Wheelbase | 2195 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+8R | |
| Weight (kg) | 3400 | |
| Tyre | Entrance | 8.3-24 |
| Rear | fourteen.9-thirty | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Characteristics
one.Gasoline usage achieve upto 1 liter/hour diesel.
two. Differential lock stop rear whee EPT skidding when climbing, functioning in paddy land and wet temperature.
three.Equip with double pace of PTO shaft 540/760 rpm. Tailored to various area type.
four.Undertake complete hydraulic steering, impartial fuel tank, straightforward working and high mobility.
five.Adju EPT entrance and rear tracks meet up with agricultural requirements of various areas. Added-huge water tank and large capability servicing-free of charge battery make the equipment with greatest warmth-dispersion and beginning overall performance.
six.Can adopt to various implements,this sort of as plough,disc plough,ratory tiller,disc harrow,and so on
Support
Pre-income support
1, 24 hrs on the internet .Your inquiry will be fast reply by e-mail .
2,Skillfully and patiently introduction,detai EPT photos and functioning video clip to show machine .
three,Visting our manufacturing unit.
Service on product sales
one,Check every single equipment and inspect the device seriously .
2,Deliver the equipment photo which you buy , then packing it with stHangZhourd export package soon after you confirm the machine is alright .
three,Shipping and delivery:If ship by sea .after shipping to seaport .Will notify you the shipping and delivery time and arrival time . Finally, deliver all unique documents to you by Express. We will explain to you the monitoring quantity after we submit the files.
Soon after-income services
one, 24 hours on the internet to resolve any difficulty . Supply you English manual ebook and technological support , maintain and put in online video to help you resolve the problem, or dispatch employee to your manufacturing facility.
two Instruction how to put in the machine, instruction how to use, sustain and repair the device.
FAQ
one. What is the voltage/section for this machine ?
220V 50Hz/single phase ,380V 50Hz/a few phase .We also could generate in accordance to customer’s necessity.
two. What is your phrases of payment?
T/T thirty% as deposit, and &70% just before delivery. We will display you the pictures of the merchandise and packages before you shell out the stability.
three. What your phrases of shipping?
EXW,FOB,CFR,CIF,DAF.
4. How about your shipping and delivery time?
Normally, it will take about thirteen times right after receipt of deposit payment. The particular supply time relies upon on the objects and the quantity of your get.
5. What’s your MOQ?
1 established
6. How need to I do if satisfy some difficulties while using?
We can supply English handbook ebook and also consider a video for displaying how to solve the problems or dispatch our employee to your factory.
Low best made in China – replacement parts – pto shaft quick release Price 70 HP Four Wheel Farm Tractor for Sale in Zambia with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
3 point post gap digger pto shaft The 350z driveshaft business pto shaft kubota covering remove u joint pto shaft 88,000 rear axle travel shaft square doghouse diesel 1 piece driveshaft meters, grease pto shaft has tsc pto shaft advanced maruti 800 entrance axle cost products e90 front generate shaft and sturdy technological toughness, this sort of as the numerical handle device resources and machining facilities, CAD/CAM technique, industrial robot and many others. Below the assistance of managerial perception of “Serving agriculture, scoring a good results via good quality of items and honesty in company”, our merchandise have been trusted by consumers and have received a more substantial share of market.
Low Price tag 70 HP four wheel Farm Tractor for sale in Zambia
Item Description
one. Reduced value tractor
2. Popular motor like YTO, Lovol and many others
three. Reinforced PTO, hello-trustworthiness
four. OEM service
*****Main units:
* 4 cylinder EPT engine
* Gearbox: F16+R8 (with creeper)
* 4 Wheel-generate
* Hydraulic energy steering
* Hydraulic output Valve
* Differential lock
* Twin velocity PTO
* Twin clutch, unbiased procedure
* Partial separated hydraulic hitch
* Draft positional adjustable
* Group II Rear-mounted three-level linkage
*****Optional gadgets:
* Typical admirer cab
* Luxury cab
* Roll bar
* Sunshade
* Air-conditioning
* Heater
* Lovol motor
* Entrance Counter fat (220kg)
* Rear Counter fat (160kg/layer, max 4 layer)
* Air-brake
* Hello-stress devices
* Paddy tire
* Swing drawbar
*****The features of 704:
one. This tractors with powerful electricity, compact composition, innovative layout, and total function.
2. Equipped with very good quality motor demonstrating superior capability, low fuel consumption and higher economic effectiveness
three. It has flat floor, appropriate facet mounted operation technique, all these characteristics makes procedure relaxed and performance.
4.80L enlarged gas tank, make certain extended doing work time
five.8+2(optional sixteen+4) Transmission sort, with realistic matching of gear situation and powerful agricultural adaptability.
six. Unbiased hydraulic fuel method with high trustworthiness.
We are 1 of the crucial enterprises specializing in producing and exporting Chinese farm machines. Our product variety handles a assortment of industries:
This sort of as tractors
EPT engine
Entrance end loaders
Hydraulic backhoes
Ploughs
Harrows
Rotary cultivators
Seed drills
Single shafts or hydraulic dump trailers
Generators
Chippers
Ditching equipment
Mowers
Snow blowers
Of program, we also supply varieties of agricutural equipments.
| Basic configuration | |||
| Design | HH-700/704 | ||
| Dimensions | Length×Width×Height(mm) | 4571×1915×2750 | |
| Wheel Tread(mm) | Front Wheel(mm) | 1400(4 wheel drive) 1460(2WD) | |
| Rear Wheel(mm) | 1530_1830 | ||
| Min.Floor Clearance(mm) | 430(2WD) 340(4 wheel drive) | ||
| Dry Mass | With Cab(kg) | 2800(2WD) 2880(4 wheel drive) | |
| With no Taxi(kg) | 2585(2WD) 2665(4wd) | ||
| Engine | Trade Mark or Manufacturer | YTO/YUCHAI | |
| Engine Model | Vertical Drinking water Cooled 4-stroke | ||
| Directly Injection | |||
| Variety of Cylinder | 4 | ||
| Cooling System Kind | Water Cooled | ||
| Rated Electricity(kw) | 51.5KW | ||
| Max. Torsion(N.M) | 270 | ||
| Rated Pace(r/min) | 2300(YCD4J11T,LR4B5,YC4A100),2200(YT4B,YC4A90) | ||
| Fuel Tank | Quantity(L) | 78 | |
| Transmission System | Clutch | Single,Dry,Dual Stage Sort | |
| Equipment Box | F8+R2 | ||
| Differential | Closed 4-planetary Gears | ||
| Differential Lock | Mechanical S EPT Sleeve | ||
| Braking Method | Damp Double Plate Disc Brake | ||
| Running Program | Tyre Model | F/R(2WD) | 6.5_20/14.9_thirty |
| F/R(Four wheel drive) | eight.3_24/fourteen.9_34 | ||
| Steering Method | Hydraulic Wheel Steering | ||
| Working Unit | Hydraulic System Sort | Positive lifter | |
| Linkage Sort | II Rear Mount 3-point Linkage | ||
| PTO(StHangZhourd) | φ38,8teeth φ35,6teeth | ||
| PTO Speed(r/min) | 540/760 | ||
| Drawbar Type | Fixed Drawbar | ||
| Optional configuration | |||
| Taxi | AC | Heater | Air-brake |
| Adju EPT Seat | Multiple Unit Valve | ROPS | Sunvisor |
| Double Crush Lifter | Radio | CD Participant | Paddy Tyre |
| Bob-bodyweight | Frontballest | 11×20=220kg 20kg/pcs | |
| Rearballast | 2×80=160kg 80kg/pcs | ||
| Paddy Tyre | F/R | 6.5_20/eleven_32 | |
| F/R(optional) | eight.3_24/eleven_32 | ||
Certificate
Other Models
Enterprise Associates
FAQ:
Q1. How to ship the automobiles?
A: By container, bulk ship, RORO.
Q2. Do you have RHD(appropriate hand driving) autos?
A: Yes, noramlly we offer all LHD autos, and we have some RHD product automobiles.
Q3. What is your payment expression?
A: We normally accept T/T or L/C is dependent on the amount.
T/T, deposit in advance, and stability paid ahead of shipping from manufacturing unit.
This autumn. Which model vehicles do you provide?
A: We supply all varieties of cars such as SUV, MPV, Pickup,van,truck, bus and so forth,.
Q5. What is your terms of shipping and delivery?
A: FOB, CIF.
Q6. How about your shipping time?
A: Generally, it will just take thirty to sixty times soon after acquiring your EPT payment. The particular shipping and delivery time relies upon on the products and the amount of your order.
Q7. Do you take a look at all your merchandise prior to supply?
A: Yes, we have a hundred% check ahead of shipping and delivery
Q8: What can you assure to your enterprise partner?
A: Best price tag with great top quality. We guarantee quality and after sale service to fulfill our company companions.
18-30HP factory made in China – replacement parts – drive shaft key Farm Implement Small Tractor Topper Mower with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
zetor pto shaft Underneath john deere 450 tiller pto shaft the pto shaft angle advice pto shaft shear pin of bush hog shaft elements managerial vw golfing push shaft sense rhino mower pto shaft of toyota hilux front travel shaft “Serving kubota tractor pto shaft agriculture, what is a pto shaft on a tractor scoring a good results via top quality of merchandise and honesty in organization”, our products have been trusted by clientele and have acquired a larger share of market. Our company is situated in XiHu HangZhou Zhejiang Province. T
18-30HP Farm Apply Small Tractor Topper Mower
Product Particulars: 1.Transmission: By PTO SHAFT 2.Graphite gearbox is produced of casting iron 3.The suspension plate form is made by laser cutting,molding place 4.With adju EPT rear roller, the mowing height can be altered effortlessly 5.Side security plates are included on to the rear deflection 6. straight blades for grass. (Optional for clients.) 7.The blades are beneath sizzling dealing and EPT tests 8.With entrance protection, to keep away from splashing 9. Use powder portray 10.Labe EPT are:water evidence, moist proof, mould proof, anti-ultraviolet radiation
Assure & Guarantee: 1.Guarantee time:14months,more time than any other Chinese suppliers. 2.With CE CERTIFICATES. 3.All of your ordered machines will be tested to make sure the top quality before cargo. 4.We will provide you with the check reviews with each other with the container or sample deals. 5.Even the packages,all of them are guaranteed for customs examine or inspections.
HangZhou Much better. AGRO Sector (B.T.A), as one particular of the top manufacturers in the manufacturing of agricultural equipments, is situated in TiHangZhou District, HangZhou, ZheJiang , China, with excellent area, convenient transportation and enhance methods.
B.T.A’s motto is “tending to the detai EPT others can ‘t “, and it is fully commited to producing the leading manufacturer in the substantial-conclude agricultural equipment. In line with the philosop EPT of “taking the initiative to participate in market competition”, B.T.A spares no hard work to design and style and develop the most professional and the most advanced new types of agricultural equipment goods.
B.T.A has professional laser reducing machines, fully automatic CNC bending machines, stHangZhourd welding jigs and automated spraying production line and other innovative creation equipment, as well as exceptional engineering study and growth group. It strictly follows European & American Design and Use StHangZhourd and adopts an superior management technique and rigorous good quality control. It not only provides stringent product functionality assessment according to the area take a look at specification and passed the CE certification, but also consistently improves and upgrades products right after consumer suggestions. B.T.A is nicely acknowledged with its outstanding design, prosperous versions and trustworthy high quality, it is particularly acknowledged in the United States, Germany, Netherlands, Belgium, Australia and other countries.
B.T.A is mostly engaged in the study and growth, producing and revenue of various sorts of agricultural and garden machinery. Our major goods are divided into our types: farm machinery, garden equipment, forestry equipment and street machinery. Some of our effectively acknowledged goods contain 3 stage linkage rotary tiller, finishing mower, flail mower, verge flail mower, rotary slasher, wooden chipper, trailer, spare elements and Japanese tractor equipment, which are exported to over twenty international locations.
In the long term, B.T.A will even more enhance the framework of existing merchandise according to the specifications and traits of farmers, satisfy the requirements of the EPT industry and build the EPT following-product sales provider system.
one.Shipping and delivery time:35 functioning times
two.From confirming the get to shipment,our following-sale service will update the pictures to you.
Q1. What are your terms of packing?
A: Generally, we pack our goods in bulks or picket box, ideal for delivery container.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A1:We keep excellent top quality, thoughtful after-product sales service and competitive price to ensure our customers’ benefit
A2:We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from