Tag Archives: farm machinery

China manufacturer CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft

Product Description

 

Product Description

Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft

A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer. 

Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.

Product Specifications

 

In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.

 

Packaging & Shipping

 

 

 

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like  Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT’S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.  

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.How long is your delivery time and shipment?

30-45days

 

Type: Pto Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor
Material: 45cr Steel
Power Source: Pto Dirven Shaft
Weight: 8-15kg
After-sales Service: Online Support
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pto shaft

How do manufacturers ensure the compatibility of drive shafts with different equipment?

Manufacturers employ various strategies and processes to ensure the compatibility of drive shafts with different equipment. Compatibility refers to the ability of a drive shaft to effectively integrate and function within a specific piece of equipment or machinery. Manufacturers take into account several factors to ensure compatibility, including dimensional requirements, torque capacity, operating conditions, and specific application needs. Here’s a detailed explanation of how manufacturers ensure the compatibility of drive shafts:

1. Application Analysis:

Manufacturers begin by conducting a thorough analysis of the intended application and equipment requirements. This analysis involves understanding the specific torque and speed demands, operating conditions (such as temperature, vibration levels, and environmental factors), and any unique characteristics or constraints of the equipment. By gaining a comprehensive understanding of the application, manufacturers can tailor the design and specifications of the drive shaft to ensure compatibility.

2. Customization and Design:

Manufacturers often offer customization options to adapt drive shafts to different equipment. This customization involves tailoring the dimensions, materials, joint configurations, and other parameters to match the specific requirements of the equipment. By working closely with the equipment manufacturer or end-user, manufacturers can design drive shafts that align with the equipment’s mechanical interfaces, mounting points, available space, and other constraints. Customization ensures that the drive shaft fits seamlessly into the equipment, promoting compatibility and optimal performance.

3. Torque and Power Capacity:

Drive shaft manufacturers carefully determine the torque and power capacity of their products to ensure compatibility with different equipment. They consider factors such as the maximum torque requirements of the equipment, the expected operating conditions, and the safety margins necessary to withstand transient loads. By engineering drive shafts with appropriate torque ratings and power capacities, manufacturers ensure that the shaft can handle the demands of the equipment without experiencing premature failure or performance issues.

4. Material Selection:

Manufacturers choose materials for drive shafts based on the specific needs of different equipment. Factors such as torque capacity, operating temperature, corrosion resistance, and weight requirements influence material selection. Drive shafts may be made from various materials, including steel, aluminum alloys, or specialized composites, to provide the necessary strength, durability, and performance characteristics. The selected materials ensure compatibility with the equipment’s operating conditions, load requirements, and other environmental factors.

5. Joint Configurations:

Drive shafts incorporate joint configurations, such as universal joints (U-joints) or constant velocity (CV) joints, to accommodate different equipment needs. Manufacturers select and design the appropriate joint configuration based on factors such as operating angles, misalignment tolerances, and the desired level of smooth power transmission. The choice of joint configuration ensures that the drive shaft can effectively transmit power and accommodate the range of motion required by the equipment, promoting compatibility and reliable operation.

6. Quality Control and Testing:

Manufacturers implement stringent quality control processes and testing procedures to verify the compatibility of drive shafts with different equipment. These processes involve conducting dimensional inspections, material testing, torque and stress analysis, and performance testing under simulated operating conditions. By subjecting drive shafts to rigorous quality control measures, manufacturers can ensure that they meet the required specifications and performance criteria, guaranteeing compatibility with the intended equipment.

7. Compliance with Standards:

Manufacturers ensure that their drive shafts comply with relevant industry standards and regulations. Compliance with standards, such as ISO (International Organization for Standardization) or specific industry standards, provides assurance of quality, safety, and compatibility. Adhering to these standards helps manufacturers meet the expectations and requirements of equipment manufacturers and end-users, ensuring that the drive shafts are compatible and can be seamlessly integrated into different equipment.

8. Collaboration and Feedback:

Manufacturers often collaborate closely with equipment manufacturers, OEMs (Original Equipment Manufacturers), or end-users to gather feedback and incorporate their specific requirements into the drive shaft design and manufacturing processes. This collaborative approach ensures that the drive shafts are compatible with the intended equipment and meet the expectations of the end-users. By actively seeking input and feedback, manufacturers can continuously improve their products’ compatibility and performance.

In summary, manufacturers ensure the compatibility of drive shafts with different equipment through a combination of application analysis, customization, torque and power capacity considerations, material selection, joint configurations, quality control and testing, compliance with standards, and collaboration with equipment manufacturers and end-users. These efforts enable manufacturers to design and produce drive shafts that seamlessly integrate with various equipment, ensuring optimal performance, reliability, and compatibility in different applications.

pto shaft

How do drive shafts handle variations in load and vibration during operation?

Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:

1. Material Selection and Design:

Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.

2. Torque Capacity:

Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.

3. Dynamic Balancing:

During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.

4. Dampers and Vibration Control:

Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.

5. CV Joints:

Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.

6. Lubrication and Maintenance:

Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.

7. Structural Rigidity:

Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.

8. Control Systems and Feedback:

In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.

In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.

pto shaft

How do drive shafts contribute to transferring rotational power in various applications?

Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:

1. Vehicle Applications:

In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.

2. Machinery Applications:

In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.

3. Power Transmission:

Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.

4. Flexible Coupling:

One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.

5. Torque and Speed Transmission:

Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.

6. Length and Balance:

The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.

7. Safety and Maintenance:

Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.

In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.

China manufacturer CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft  China manufacturer CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
editor by CX 2023-11-14

China 1 Series Connect Triangle Tube Yokes PTO Shaft Components Driveline Parts For Farm Tractor Agriculture Machinery with Great quality

Condition: New
Warranty: 1 12 months
Applicable Industries: Producing Plant, Machinery Restore Outlets, Farms, Retail, Design performs
Fat (KG): 1.5 KG
Showroom Place: None
Online video outgoing-inspection: Provided
Equipment Examination Report: Provided
Advertising and marketing Type: Regular Product
Sort: Tube Yokes
Use: Tractors
Product title: Triangle Tube Yokes PTO Shaft Components Driveline Components
Color: Silver, Yellow,black,OEM
Function: Power transmission
Search term: PTO Drive Shaft Tube yoke
MOQ: one
Technics: Forge, Chilly-Drawn
Packing depth: pp bag + paper box
Substance: 40Cr,45#
Emission Normal: Euro II
Dimensions: OEM
Packaging Particulars: Shaft Areas -> Plastic Bag -> White/Coloration box -> Carton -> Pallet
Port: HangZhou or ZheJiang

Item Overview one Series Hook up Triangle Tube Yokes PTO Shaft Factors Driveline Components For Farm Tractor Agriculture Equipment Merchandise Specifications

Name1 Sequence Connect Triangle Tube Yokes PTO Shaft Parts Driveline Areas For Farm Tractor Agriculture Machinery
AdvantageWe are 1 specialist maker of all types driveline, Pto shaft and areas.Our manufacturing facility Protect an region of 13320.
ApplicationKinds of Tractors & Farm Implements
PartsJapanese tractor transmission clutch disc areas for B1400 B7000
Processing Of YokeForging
Plastic CoverYWBWYSBSEtc
ColorGreenOrangeYellowBlack Ect.
SeriesT1-T10 L1-L6S6-S1010HP-150HP with SA,RA, HangZhou CZPT industrial air compressor steam turbine compressor SB,SFF,WA,CV, And so forth
Tube SortLemon,Trianglar,Star,Sq.,Hexangular,Spline,Unique, Ect
Spline Variety1 1/8″ Z61 3/8″ Z6 1 3/8″ Z21 1 3/4″ Z20 1 3/4″ Z6 8-38*32*6 8-forty two*36*7 8-48*forty two*8 Head Gasket Bolts Set Suit For Md976845 Md97-6845 Engine Areas Complete Gasket Established Package
Tractor Design we can provideB1500/1400,B5000,B6000, B7000, TU1400, TX1400, TX1500, YM F1401, YM1400 And many others.
Features AT A Look Other pertinent areas for autos or machinery we have produced in our workshop are as follows:Drive shaft components and assemblies,Universal joint elements and assemblies,PTO drive shafts,Spline shafts,Slip yokes,Weld yokes,Flange yokes,Steering columns,Connecting rods,etc. Merchandise packaging Exhibition Why Decide on Us FAQ Q: Do you provide samples ? A: Of course, we could supply the sample.Q: How long is your supply time ? What is your phrases of payment ?A: Usually it is thirty-45 days. The time might fluctuate relying on the item and the amount of customization.Q: What is the precise MOQ or price tag for your solution ?A: As an OEM organization, we can provide and adapt our goods to a broad assortment of needs.As a result, MOQ and value might tremendously vary with dimension, materials and more requirements For occasion, S sequence helical-worm gearbox energy transmission vertical to horizontal equipment reducer costly products or common items will typically have a reduce MOQ.Make sure you get in touch with us with all appropriate information to get the most precise quotation.If you have yet another query, please really feel free of charge to get in touch with us.

air-compressor

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China 1 Series Connect Triangle Tube Yokes PTO Shaft Components Driveline Parts For Farm Tractor Agriculture Machinery     with Great quality China 1 Series Connect Triangle Tube Yokes PTO Shaft Components Driveline Parts For Farm Tractor Agriculture Machinery     with Great quality
editor by Cx 2023-06-21

Best wholesaler made in China – replacement parts – PTO shaft manufacturer & factory South kubota pto shaft cap Africa Hot Sale Farm Machinery Dq554 55HP 4X4 4WD Compact Mini Farm Tractor with Cabin with ce certificate top quality low price

We – EPG Team the biggest agricultural gearbox and pto factory in China with 5 various branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory South  kubota pto shaft cap Africa Hot Sale Farm Machinery Dq554 55HP 4X4 4WD Compact Mini Farm Tractor with Cabin with ce certificate top quality low price

2008 jeep liberty entrance travel shaft Principal ag pto shafts merchandise pto shaft for kubota tractor consist of: tom woods driveshaft jk manure google drive shaft 2019 spreading one thousand pto to 540 adapter truck, pto shaft inventory potato locking pin for pto shaft planting/harvesting concentrate st225 driveshaft device, 2000 bmw 323i generate shaft disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, blend rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing movie, plough tip and share, cultivator tine, casting areas and many others. EPG Machinery is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our manufacturing facility to HangZhou worldwide airport. Large High quality Dq554 55HP 4 wheel drive Modest wheel compact Farming Tractor Sizzling Sale in Peru

Tractor Primary Features and Benefits:
one.Outfitted well-known manufacturer motor demonstrating sophisticated ability, minimal gas consumption and high financial performance.
2. Streamlined look layout, lovely and generous.
three.Transmission Scenario adopt meshed change and include the gearbox interlock device tends to make the procedure far more smoothly, trustworthy and simpler.
four. Double motion clutch with disc spring, perform steadily and simple to work.
five. Fully hydraulic steering program tremendously reduced driver’s function power.
six. Moist disc brake gadget, trustworthy brake functionality.
seven. Independent injection of hydraulic oil, dependable to run.
8. The lifter with drive and position adjustment, with reputable lift.
9. Tractor PTO:
PTO in Double pace : 540/one thousand, 760/a thousand, 540/760r/min Optional, For high doing work efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural tools of all more than the planet.

10. Total sequence light, ROPS,Sunshade/Cover, Admirer/Heater/Air-conditioned cabin are all available, for much more relaxed driving atmosphere.

Tractor Main specificaiton and Specialized parameters:

Tractor Design DQ554
Drive variety 4×4
Engine
Variety of engine Xinchai 4-Cylinder  EPT motor
Potential of gasoline tank(L) 38L
Engine power at rated speed  40.5kw / 55HP
Rated velocity (r/min) 2400
Transmission
Clutch dry,dual-phase sort
PTO velocity  540/1000rpm or 540/760rpm
Equipment change 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three stage linkage
Classification of 3-point link rear, category II
Lifting force (at stage of 610mm)KN twelve
Technical parameter
Overall size (L x W x H)mm 3513x1750x2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-twenty
Rear tire twelve.4-28/fourteen.9-24 (optional)
Optional Configurations
ROPS,Cover(Sunshade),Cabin with Supporter/Heater/Air-situation, 2-Team Hydraulic output valve, Front ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, 14.9-24 big rear tire, Swing attract bar.

DQ554 55HP Four wheel drive Tractor detai EPT present :

EPT Manufacutring Line:

Strictly Inspecting and Complete Testing for ensuring higher top quality solution:

Tractor Packing and Loading container for Delivering goods :

Numerous Transportation modes and Shipping term to satisfy different clients demand :

Please make contact with us if you have any need for our solution :

Greatest cost will be quoted for you as before long as obtain your Necessity !

Best  wholesaler  made in China - replacement parts - PTO shaft manufacturer & factory South  kubota pto shaft cap Africa Hot Sale Farm Machinery Dq554 55HP 4X4 4WD Compact Mini Farm Tractor with Cabin with ce certificate top quality low price

Best near me made in China – replacement parts – PTO shaft manufacturer & factory 180HP pto bolt pattern 4*4WD Machinery Construction Large Traktar Farm Agri Tractor with ce certificate top quality low price

We – EPG Team the greatest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  near me  made in China - replacement parts - PTO shaft manufacturer & factory 180HP   pto bolt pattern 4*Four wheel drive Machinery Development Huge Traktar Farm Agri Tractor with ce certificate prime good quality reduced price tag

pto shaft for county line tiller Our pto shaft suppliers company 1999 jeep grand cherokee travel shaft has weasler pto guard sound 6 spline pto shaft dimensions economic pto quick coupler energy, pto publish hole diggers builds na miata driveshaft up fixing pto shaft a what to do when your pto shaft will not increase technician team contingent with high good quality, possesses the generation assembly line of technicalization in China and best method checking on item quality and runs marketing networks through the region. EPG major generation is of farming 15-500 horsepower tractor supporting equipment, mechanical cultivation, harvesting machinery and components.

180HP 4*Four wheel drive Equipment EPT Large Traktar Farm Agri Tractor

one.YTO/Weichai/Yuchai Motor
2.Push Wheel:4wd(4*4)
3.Four-stroke engines with higher torque reserve.
four.Adju EPT front and rear tracks.
five.Total hydraulic steering.

Technological Parameters

Model No. TL1804
Kind 4*four
Motor Model WP6G180E330(Weichai Engine)
Rated power(kw) 132.five
RPM 2200
Overall dimension (L*W*H) 5350*2320*3000/3140
Tread(mm) Entrance 1760(1650,1778,1862,1888,1972,1990,2100)
Rear 1750(1650~2368)
Wheelbase 2898
Clutch Type Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven
Gear Box Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation.
Gear shift 32F+24R(Shuttle gift)
Weight (kg) 6600
Tyre Entrance 14.9-28
Rear eighteen.4-38
PTO(RPM) Rear seperated, 540/1000 rpm
PTO Shaft Spline (mm) 8D-38×32×6

Tractor Features
1.Gasoline consumption achieve upto 1 liter/hour diesel.
two. Differential lock avoid rear whee EPT skidding when climbing, running in paddy land and rainy climate.
three.Equip with double speed of PTO shaft 540/760 rpm. Adapted to diverse field type.
four.Undertake complete hydraulic steering, impartial fuel tank, easy running and substantial mobility. 
5.Adju EPT entrance and rear tracks fulfill agricultural requirements of different areas. Added-massive drinking water tank and higher capability upkeep-cost-free battery make the equipment with ideal warmth-dispersion and starting functionality.
six.Can undertake to a variety of implements,these kinds of as plough,disc plough,ratory tiller,disc harrow,and so on

Service
 
Pre-income services
1, 24 hrs on-line .Your inquiry will be rapid reply  by electronic mail . 
 
2,Professionally and patiently introduction,detai EPT images and doing work video to display machine .
three,Visting our manufacturing unit.
 

Provider on sales
one,Check every machine and inspect the device significantly . 
two,Ship the machine image which you buy , then packing it with stHangZhourd export bundle after you validate the equipment is ok .
3,Shipping and delivery:If ship by sea .following supply to seaport .Will inform you the shipping time and arrival time . Finally, deliver all original documents to you by Express. We will inform you the monitoring variety right after we post the paperwork.

Right after-sales provider
one, 24 several hours on the web to remedy any difficulty . Supply you English manual e-book and complex assistance , maintain and install online video to support you remedy the problem, or dispatch worker to your manufacturing facility.
two Instruction how to install the device, coaching how to use, keep and fix the device.

 
FAQ
one. What is the voltage/section for this device ?
220V 50Hz/one period ,380V 50Hz/a few section .We also could produce according to customer’s prerequisite.
two. What is your terms of payment?
T/T 30% as deposit, and &70% before shipping. We will present you the photos of the merchandise and deals before you pay out the harmony.
three. What your terms of shipping and delivery?
EXW,FOB,CFR,CIF,DAF.
four. How about your delivery time?
Usually, it will consider about thirteen days soon after receipt of deposit payment. The particular shipping and delivery time depends on the products and the amount of your order.
5. What’s your MOQ?
1 established
six. How should I do if fulfill some problems while using?
We can provide English manual ebook and also just take a video for demonstrating how to solve the problems or dispatch our employee to your manufacturing unit.

 
 

 

Best  near me  made in China - replacement parts - PTO shaft manufacturer & factory 180HP   pto bolt pattern 4*4wd Machinery Development Large Traktar Farm Agri Tractor with ce certification top high quality minimal price tag

Anon China pto spline adapter Agricultural Machinery 30-50 HP Farm Diesel Walking Mini Tractor with ce certificate top quality low price

We – EPG Group the greatest agricultural gearbox and pto factory in China with 5 different branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Anon  China   pto spline adapter Agricultural Machinery 30-50 HP Farm Diesel Walking Mini Tractor with ce certificate top quality low price

With higher good quality regular straight line, h2o cooling, 4 stroke, direct injection EPT engine, imported gas injection technique, minimal gasoline intake and f EPT pace, can attain big torque output beneath bad circumstances (much more than thirty% torque reserve ratio), durable and reputable.
The maximum velocity can attain 32km/h, and the subject transfer and transportation procedure has much more positive aspects, which can efficiently reduce the load time and enhance the procedure efficiency.
Equipped with 70L large ability rotary oil tank, it can be easily refueling and can satisfy the demands of steady procedure for far more than 10 hours.
The f EPT shift of EPT and backwards can be realized by adopting the shuttle equipment shifting composition and when hanging. It has twelve ahead gears and 12 backward gears, and has a lot of matching speeds. It can decide on the greatest operation speed in accordance to different equipment and various soil resistance.
Entirely think about the various planting specifications and operating ridges of customers. Optional wheelset stepless adju EPT unit (1.three-one.8m), broad assortment of wheelsets, no ridge and seedling strain during procedure.
The dual speed mix of power output can meet up with the demands of a variety of devices for speed, adju EPT traction, guaranteeing that electrical power output and traction can be utilized at the very same time, with out disturbing every other.
The horizontal sturdy stress raise is marked with a massive lifting pressure. The optional position is independently altered to raise, imported technological innovation and dependable overall performance.
Adopting a new kind of integral type completely sealed front axle, the driving shaft power is improved and tough, which is the initial option for paddy subject operation.
Geared up with air conditioned taxi, isolation and seem insulation, and massive annular visible discipline, all temperature operations can be realized. The taxi has great sealing efficiency, and filth, filth and other debris are not effortless to enter the cab throughout operation, so that the functioning atmosphere is thoroughly clean and relaxed.
Making use of facet placing, flat floor and suspension pedal, the distribution of management structure is reasonable, the driving place is massive, the comfort of operation is enhanced, and the driver’s working toughness is decreased.

Product 304 404 504 0571
Horse electricity/Generate Kind 30hp,4X4 40hp,4X4 50hp,4X4 60hp,4X4
Motor Lai EPT Three Engine/ EPT Three Engine
Kind Vertical,water-cooled,4 Strokes,Immediate in Injection
Rated Output(KW) 23.6 29.four 36.eight forty.4
Dimension(mm) 3050X1320X2050
Wheel Foundation(mm) 1700 1850 1900 1900
Wheel Thread F/R(mm) 1060/1080
Mini Floor Clearance(mm) 280
Gear Shift 8F+2R
Cluth Kind Dry Single-phase
Tire F/R 600-sixteen/nine.fifty-24 600-sixteen/9.fifty-24 650-sixteen/eleven.two-24 650-16/eleven.2-24
Steering Hydraulic Steering
Brake Toe Sort
Park Brake Latch Pedal
Hitch Partial Divided,three-level Hydraulic hitch,Class I
Max. Carry Force(N) ≥ 0571 ≥6950 ≥6300 ≥6300
Rear PTO Rear Rectangle Spline,six Enamel,720rpm Rear Rectangle Spline,6 Enamel,540/720rpm

 

Anon  China   pto spline adapter Agricultural Machinery 30-50 HP Farm Diesel Walking Mini Tractor with ce certificate top quality low price

Anon  China   pto spline adapter Agricultural Machinery 30-50 HP Farm Diesel Walking Mini Tractor with ce certificate top quality low price

Cheep China bmw r1200gs drive shaft in Abu Dhabi United Arab Emirates Farm Tractor Machinery 50HP Garden Wheeled Tractor with ce certificate top quality low price

We – EPG Group the most significant agricultural gearbox and pto manufacturing facility in China with five diverse branches. For far more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Cheep  China  bmw r1200gs drive shaft  in Abu Dhabi United Arab Emirates  Farm Tractor Machinery 50HP Garden Wheeled Tractor with ce certificate top quality low price

Cheep farm tractor equipment 50HP backyard wheeled tractor
 

Goods Description
Dimention: 3848× 1708× 2300
Motor: four cylinder EPT motor
Rated velocity(r/min): 2300
PTO velocity(rpm): (540, one thousand) Or (720, 1000), or (540, 720)
Clutch: Dry, Solitary Piece, Independnt operation, Double Performing

Gearbox: 8F+4R, direct equipment compound shaft, creeper gear and shuttle equipment optional

Linkage: CategoryIIrear-mounted 3-stage linkage
The smallest clearance(mm): 370

The attributes of 50hp farm tractor

one. This series tractors are characterised by compact structure, convenient procedure and maintanance, high dependability, high versatility and interchangeability for the elements and broad adaption range
two. There are many optional parts this kind of as one particular-phase clutch, dual-phase clutch, creeper gear, shuttle gear, air brake system, hydraulic steering, EPT panel, hydraulic output program and so on so as to attain multifunction blend for meeting diverse specifications of the end users.
3. Double velocity PTO(540r/min, 1000r/min) in accordance to the EPT common.
four. Robust lifting ability and large traction pressure.
five. Extensive turning angle, very good mobility, higher floor clearance and very good seal.

Farm tractors 25~130hp we can provide.

Our tractor have over 70 varieties tractor primary in six collection.
one.thirty series 250-354 (from 25hp-35hp 2/4 wheel drive)
2.40 sequence four hundred-554B (from 40hp-55hp two/four wheel drive)
three.fifty series 550-654 (from 55hp-65hp 2/four wheel drive)
four.eighty series 700-854B (from 70hp -85hp 2/4 wheel drive)
five.ninety sequence 800-1004(from 80hp-100hp 2/4wd)
6.a hundred series 1104-1304(from 110hp-130hp 4 wheel drive)

TS854 tractor technical parameters

Model TS500 TS504
General Specifications Variety 4×2 4×4
Overall dimensions LxWxH(mm) 3829 × 1708 × 2200 3848 × 1708 × 2300
Constructional weight(kg) 1805 1960
Rated traction force(kn) twelve.five 13.5
Wheel base(mm) 2037 1692
Front wheel tread(mm) 1270-1670Adjustable 1430-1630Adjustable
Rear wheel tread(mm) 1220-1620Adjustable 1320-1620Adjustable
Min.land clearance(mm) 420 370
Min.quality in use(kg) 1965 2120
Front wheel tyre size 6.-16 eight.3-20
Rear wheel tyre size twelve.4-28 twelve.4-28
Min.turning radius(mm)Unilateral Braking/
Unilateral Nonbraking )
4.one/three.four four.2/three.5
Theoretical speed(km/h) Creeper shuttle gear Creeper shuttle gear
Engine Model JD4100
Sort   Straight line,upright,water-cooled,four-stroke
12 hours power ( kw ) 36.eight
Rated Speed ( r/min ) 2300
Fuel consumption(g/kw.h) ≤ 242
Max.torque(N.m) ≥ 210
Speed of Max.torque ( r/min ) ≤ 1680
BorexStroke(mm) φ 100 × one zero five
Diesel Consumption ( g/kW.h ) ≤ 2.04
Starting mode    Electric
Break System Service Brake    mechanical,wet,disk
Parking Brake    locking pedaltype
Transmission Clutch   Dry type,single disk,two stage,constant mesh
Gear box 8F+4R,direct gear compound shaft,creeper gear and shuttle gear optional
Steering   Hydraulic steering
Steering type   Wheelsteering
Main Drive   Spiral bevel gear
Differential Mechanism   Dowel pin type,two planetary gearing,shut
Final Drive   Single stage,external,planetary gearing
Operating System Lifter tilling depth control   Draft & position adjustable lifter
Max.lifting capacity(kn) ≥ 8.three
Suspension type   postposition, Three- point,I category
Speed of P.T.O.(r/min) ( 540 , 1000 ) or  ( 720 , a thousand ), or  ( 540 , 720 )
Type of P.T.O. postposition semiindependent
Traction Equipment   Swing draw bar

Certificate

Other Designs

Enterprise Partners

FAQ:
Q1. How to ship the autos?
A:   By container, bulk ship, RORO.

Q2. Do you have RHD(proper hand driving) automobiles?
A:   Yes, noramlly we offer all LHD autos, and we have some RHD model vehicles.

Q3. What is your payment time period?
A:  We typically acknowledge T/T or L/C relies upon on the quantity. 
     T/T, deposit in advance, and stability compensated ahead of delivery from factory.

This fall. Which product cars do you supply?
A:  We source all kinds of vehicles this kind of as SUV, MPV, Pickup,van,truck, bus and so on,.

Q5. What is your conditions of shipping?
A:   FOB, CIF.

Q6. How about your supply time?
A:  Generally, it will get 30 to sixty times soon after receiving your EPT payment. The certain delivery time depends on the things and the quantity of your get.

Q7. Do you take a look at all your merchandise before shipping?
A:   Yes, we have 100% take a look at prior to supply

Q8: What can you promise to your enterprise companion?
A:  Best cost with very good top quality. We guarantee quality and following sale provider to fulfill our enterprise partners. 

Cheep  China  bmw r1200gs drive shaft  in Abu Dhabi United Arab Emirates  Farm Tractor Machinery 50HP Garden Wheeled Tractor with ce certificate top quality low price