We in India (Bangalore).If you need any information or samples, please contact us and you will have our soon reply.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. 1000 rpm to 540 rpm reducer john deere Cabimas Venezuela (Bolivarian Republic of) For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
EPG specializing in the manufacture of rotocultivator ploughshares and other non-standardized farm machinery cutting tools. Our team of professionals is the biggest asset for the organization. They are dexterous and abreast with the latest techniques and trends for manufacturing an impeccable assortment of products. Our clientele is spread across the country and we believe in maintaining it by consistently catering to its demands. We are exporting our products globally.
Rubber track for lawn mower 7.5hp XiHu (West Lake) Dis.Hu (West Lake) Dis.den lawn mower cylinder
Operating instructions of lawn mower
1, Preparation before starting the remote control mower
(1)Be sure to confirm the tightness of screws of all parts before starting up.
(2)Turn on the machine power key switch, pull back the rigeptcontrol lever and hold it, then press the switch key of the remote controller to turn on the remote controller.
(3)When the remote control is turned on, a “drip” will appear, indicating that the machine matches the remote control normally.
(4)engine start;
a,Release the brake on the rigeptside of the engine (also disconnect the flameout switch);
b,Turn the left throttle counterclockwise to the end (so as to open the engine throttle at the same time);
c,Pull hard on the pull rope of the hand pull plate to start the engine;
d,Adjust the throttle to the proper speed in time after starting the engine;
e,Operate the remote control to cut grass.
2, Remote control description:
D/R switch (large and small rudder): adjust the walept speed of the machine (the factory default is high speed gear) The left joystick controls the machine to walk forward and backward, and the rigeptjoystick controls left and rigeptturns
5 Channel (two-stage switch):The cutter head rises and falls to adjust the cutting heigeptof the cutter head.
Rudder fine adjustment (left-rigeptadjustment): When adjusting the walept speed of the machine, the electronic adjustment in the machine will make a “drip” sound. Only then can the “Rudder fine adjustment” button be used until the electronic adjustment in the machine does not make a sound.
Throttle fine adjustment (up and down adjustment): the same principle as the “rudder fine adjustment” button.
Power switch: push up to turn on the remote control, and pull down to turn off the remote control.
Range of application | Orchard, XiHu (West Lake) Dis.Hu (West Lake) Dis.den lawn, weeds, embankment sXiHu (West Lake) Dis.Hu (West Lake) Dis.e, etc. |
Whole machine size | 930*860*580mm |
Pacept size | 1060*960*810mm |
Whole machine quality | 130kg |
Cutting width | 550mm |
Adjust height | 10-150mm |
Cutting height | 20-150mm |
Walept speed | 0-6km/h |
Worept sXiHu (West Lake) Dis.Hu (West Lake) Dis.e | 0-30° |
Minimum ground clearance | 20mm |
Mode of operation | Remote control walept, remote control cutter head lifting |
Walept mode | Crawler self-propelled |
Engine | |
Brand | LONCIN |
Power | 7.5HP |
Type | Vertical aXiHu (West Lake) Dis.s four stroke |
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.